SPONSORS
2024 ICRBE EXPO |
Sanding completed
Posted by:
Bruce A. Tomaselli
(---.dioceseaj.org)
Date: February 23, 2005 08:00AM
Okay, Guys! I sanded the the blemishes off. Now there are white marks where I sanded. Will those disappear when I put the next coat of expoxy on? I believe the reason I got those blemishes is becaue I messed with the epoxy after it began to set and I put too much on. Keep the help coming, please! Thanks, Bruce Re: Sanding completed
Posted by:
Anonymous User
(Moderator)
Date: February 23, 2005 08:57AM
Some of the white that you see is sanding dust within the scratch marks. If you have an old toothbrush, and it's clean (not one you used for cleaning grease or oil off something) you can gently brush the sanding dust off the areas you've sanded. When you finish over this the marks should disappear.
Generally, you want to sand down to about 400 grit paper to get rid of any large sanding marks. ........... Sorry, only registered users may post in this forum.
|