SPONSORS
2024 ICRBE EXPO |
Temperature of oven in blank manufacturing
Posted by:
Rockin Yee
(---.ssmb.com)
Date: February 17, 2005 02:36PM
Does anyone know what temperatures reach in blank manufacturing ovens? Re: Temperature of oven in blank manufacturing
Posted by:
Anonymous User
(Moderator)
Date: February 17, 2005 02:43PM
It can vary depending on the material and prepeg system, but I'd guess most fall between 275F and 350F. I should know better but off the top of my head I think that's it. Again, the type prepeg material would determine what's needed.
.............. Re: Temperature of oven in blank manufacturing
Posted by:
Todd R. Vivian
(---.lamiglas.com)
Date: February 17, 2005 04:18PM
Tom is correct, the resin system varies so the cure cycle will vary with each manufacturer. The materials we use all have the same resin system and cure at 250. There are some resins available that cure at very low temperatures (175) but in testing we have not been very successful with them.
Todd Sorry, only registered users may post in this forum.
|