SPONSORS
2024 ICRBE EXPO |
wrapping advice needed
Posted by:
Anonymous User
(63.146.104.---)
Date: February 13, 2005 04:38PM
so what else is new, right?? am building the wife a light spinning rod (bass) and she wants the guide wraps to be gold HT METALLIC THREAD by gudebrod. any problems using this as a full wrap instead of just a trim? did one guide and looks great but now need advice about CP and finish. do i do it the same old way, w/thinned 811 and flexcoat or ??????? thanks !!!! john Re: wrapping advice needed
Posted by:
Ken Preston
(---.longhl01.md.comcast.net)
Date: February 13, 2005 09:03PM
John,
You won' t need any CP on the gold metallic thread - but you will get bubbles. Go easy on the depth of finish ( use thin coats) and go for it.. Re: wrapping advice needed
Posted by:
Ken Preston
(---.longhl01.md.comcast.net)
Date: February 13, 2005 09:05PM
Man ---- three or four people all typing at the same time! John is one popular guy! Re: wrapping advice needed
Posted by:
Anonymous User
(63.146.104.---)
Date: February 13, 2005 10:14PM
Ken Preston Wrote:
------------------------------------------------------- > Man ---- three or four people all typing at the > same time! John is one popular guy! no-johns a dummy that needs all the help he can get !! so far bud lites been helping a heck of a lot too. Sorry, only registered users may post in this forum.
|