SPONSORS
2024 ICRBE EXPO |
Question for Tom 2
Posted by:
Dale Cecil
(---.proxy.aol.com)
Date: February 12, 2005 12:35PM
Tom I have a hard time explaining this. Lets say I am doing a 4 sided Diamond and just say the diam. is 1 inch we would space the marks at one inch and on the 90 deg. we would stager the marks by a half inch. I want a 6 sided layout. Re: Question for Tom 2
Posted by:
Anonymous User
(Moderator)
Date: February 12, 2005 03:01PM
I think you would space them on the 180 at exactly halfway between those marks on the 0 degree axis. That's pretty standard for most crosswraps.
If you do a six sided lay-out, you might think of it as 3 regular chevron pairs. Each opposing axis would have the marks exactly halfway between the ones on the exact opposite axis. Now if you want to stagger the chevrons, then each pair will need to begin half again inbetween the first pair and so on and so forth. Does this make any sense? These things are easier to show than to explain in text. At least for me. ..... Edited 1 time(s). Last edit at 02/12/2005 03:03PM by Tom Kirkman. Sorry, only registered users may post in this forum.
|