SPONSORS
2024 ICRBE EXPO |
spiral wrap
Posted by:
Shane Broaddus
(---.nas11.houston4.tx.us.da.qwest.net)
Date: February 09, 2005 10:32PM
how quik do i spiral down a flipping stik with only 6 guides and a tiptop ? i build several spiral wraps and I usually use more guides
but this is a rewrap and where the guides fall i cant add any with out screwing things up... Any help would be greatly appriciated thanks BF RODS Re: spiral wrap
Posted by:
Anonymous User
(Moderator)
Date: February 09, 2005 10:42PM
Put them back right where they are, but flip them all to the bottom except for the first one (butt guide). Now add a guide inbetween the first two, but put it at 90 degrees. You'll love it.
...... Re: spiral wrap
Posted by:
shane broaddus
(---.nas11.houston4.tx.us.da.qwest.net)
Date: February 09, 2005 10:44PM
so the first guide parralell to the ground the second guide 90 degrees
the rest 180 degrees to the first? Re: spiral wrap
Posted by:
Anonymous User
(Moderator)
Date: February 09, 2005 10:52PM
Yes. Make the single transition guide very small and low frame. Try to get by with an 8 or 10. No larger.
....... Re: spiral wrap
Posted by:
Shane Broaddus
(---.nas11.houston4.tx.us.da.qwest.net)
Date: February 09, 2005 10:54PM
will do i think my 1st guide is a 12 so the rest will be smaller
Re: spiral wrap
Posted by:
Anonymous User
(Moderator)
Date: February 10, 2005 09:51AM
The only thing the transition guide will do in this instance is keep the line from rubbing the side of the blank. It does not redirect the line. You'll be surprised at straight your line path will be.
............... Re: spiral wrap
Posted by:
shane broaddus
(---.dl.dl.cox.net)
Date: February 11, 2005 02:59PM
wrappin it up like u said to going to try it out next weekend we will see how it does THANKS for everything
Re: spiral wrap
Posted by:
shane broaddus
(---.dl.dl.cox.net)
Date: February 11, 2005 02:59PM
wrappin it up like u said to going to try it out next weekend we will see how it does THANKS for everything
Sorry, only registered users may post in this forum.
|