SPONSORS
2024 ICRBE EXPO |
spey rod guides help
Posted by:
De Wane Tabbot
(---.ph.ph.cox.net)
Date: February 02, 2005 10:27PM
I'm just started building spey rods & I would like to use single foot guide insted of snake eye will this cause any problem?
Thanks for your input De Wane Re: spey rod guides help
Posted by:
Bob Crook
(---.nas2.portland1.or.us.da.qwest.net)
Date: February 02, 2005 11:34PM
De Wayne,
I don't know of any reason you can't use single foot guides . I used Titanium SS single foots on the rod referanced below, the 2 stippers which were double foots. Be sure and use a locking wrap, the Forhan locking wrap is detailed in the library above. Bob Dan Craft FT Switch Rod Update Posted by: Bob Crook (---.nas3.portland1.or.us.da.qwest.net) Date: January 25, 2005 12:24PM Awhile back there was a post with quite q bit of discussion about the Dan Craft FT blanks being built as a swtch rod. I built a Dan Craft FT 10 wt 10 ft 4 pc as a switch rod and followed the advice of Bob Meiser and used only 8 guides. It will cast a Delta Spey WF 10/11 line 80 feet with no problem. Started out with a guide on each ferrule and used the static guide placement method for the others. Butt Section: No guides Section 2: 2 Section 3: 3 Section 4: 3 Guide Spacing: 5 5/8 19 29 1/4 39 1/2 49 59 /12 79 1/2 87 1/2 Ring Size: 6 6 8 8 8 10 16 20 Based on this rod it would seem to me that maybe it would be possible to reduce the number of guides on other weight fly rods. I just received a FT 3 wt 10 ft 4 pc from Dan today and plan to test cast it with less guides before final wrapping and finishing. BTW it won't be a switch rod. The grip is a stained full wells, A8 reel seat hardware with a Redwood insert and a 3 1/2" Redwood butt. Would like to hear from some others who have done something similar with the FT. Bob Re: spey rod guides help
Posted by:
Gary Weir
(195.217.51.---)
Date: February 04, 2005 06:45AM
I have only built one rod to date, a 13' 6" spey rod, but I did a lot of researching. I used 20, 16, & 12 NSG strippers. I then used single foot SG's in 10 down to 8's for the rest of the way. I still can't remember the size of the tip top, but I think it is a 12(oversized) in model Fuji MNST. I have had no problems with this rod and it seems to shoot farther than my factory built 15 foot 2".
The blank was rated for 8/9, but it works better with a 7/8. I don't know if this is because of extra weight added by using Fuji Sic Single Legs(SG's) or not. I won't give you guide spacing or the total number of guides because I built mine on a blank not available to the USA and it may add confusion. Re: spey rod guides help
Posted by:
Loretta Strickland
(---.snfccasy.dynamic.covad.net)
Date: February 07, 2005 09:13PM
I am building my first spey rod. I have built other flyfishing rods. I can'rt seem to locate the guide spacing for a 12'6" 7/8 rod. Can anyone help me?
Thanks!! Loretta Re: spey rod guides help
Posted by:
De Wane Tabbot
(---.ph.ph.cox.net)
Date: February 08, 2005 11:58PM
I used this spacing on my last rod:
4 3/4, 10 1/8, 15 7/8, 22 11/16,31 1/16, 40 3/16, 50 1/8, 60 3/4, 72 13/16, 86 1/2,109 3/16 Sorry, only registered users may post in this forum.
|