SPONSORS
2024 ICRBE EXPO |
A Primer for the Charlotte Show
Posted by:
Andy Dear
(---.dsl.snantx.swbell.net)
Date: February 02, 2005 09:29AM
Mornin' Folks,
Just thought I'd give you a little glimpse of what Lamar will be bringing to the National Rodbuilders Show.... Over 300 American Made Casting/Spinning Blanks under $20.00 Over 100 American Made Fly Blanks Under $50.00 Many under $25.00 Over 100 American Made Graphite and Graphite/Glass Surf Blanks Under $75.00 Thousands of Pre-formed Cork Fly Grips that are of UNBELIEVABLE quality for Under $10.00 Pre-formed Casting/Spinning Cork Grips for under $5.00 Name Brand Fly Reel Seat Assemblies for under $10.00 Exotic Burl Cork Rings including a BRAND NEW Pattern, never seen before! DVDs...DVDs...and more DVDs Mandrels Cork Boring Clamps Stabilized ReelSeat Turning Stock Pre-Glued Old Stock Cork Sticks And a New item exclusively for the Rodbuilder/Woodturner, that is going to revolutionize ReelSeat/Handle turning. I am sure in the next 3 weeks, a few other products will turn up as well. My wife and I really looking forward to seeing all of you there, and for all you guys who can't make it to the show, we'll be running a little post show special to get y'all in on the action as well! Regards, Andy Dear Lamar manf. Re: A Primer for the Charlotte Show
Posted by:
Andy Dear
(---.dsl.snantx.swbell.net)
Date: February 02, 2005 11:18AM
Add to that:
About 100 custom turned reelseats Buffing Setups Various other specialty Turning accessories Re: A Primer for the Charlotte Show
Posted by:
Kim (Ilg) Cawley
(207.97.185.---)
Date: February 02, 2005 11:18AM
Andy Dear. Is this really you? I tried yesterday to figure out how to work this message board.....but I think I wrote to a guy named Richard. I kind of doubt that there could be another one of you.....
Write back if you know who I am.....and if this is not Andy Dear originally from Old Greenwich CT....sorry to have bothered you. Re: A Primer for the Charlotte Show
Posted by:
Andy Dear
(---.dsl.snantx.swbell.net)
Date: February 02, 2005 12:35PM
Yeah...I got your email...definately not from Greenwich CT!
Andy Re: A Primer for the Charlotte Show
Posted by:
Ted Morgan
(213.55.68.---)
Date: February 02, 2005 02:50PM
OOOOOOOOHHHHH!!!!
And by the time the show happens, I'll be across the International date line. Damn!! Seriously Andy, are you going to be a ealer for all that budget friendly stuff (blanks especially)? Re: A Primer for the Charlotte Show
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: February 02, 2005 04:04PM
Can you tell us more specifically what you mean by "American made" blanks? I also hope you are bringing lots of those grips and turning stock or there may be some boxing out that has to go on under the basket. Sorry, only registered users may post in this forum.
|