SPONSORS
2024 ICRBE EXPO |
Tap pigments
Posted by:
John Rowland
(---.omdx1643.uprr.com)
Date: January 24, 2005 11:41PM
Just received the tap pigments today and noticed that they are very thick. My question is, do you need to thin them down any
before using them in epoxy. thanks jr Re: Tap pigments
Posted by:
Erik Kunz
(---.dsl.snfc21.pacbell.net)
Date: January 25, 2005 01:35AM
Nope... just put a little dab into your epoxy and mix thoroughly. Add enough to make your color opaque and that's it.
Erik Re: Tap pigments
Posted by:
bill boettcher
(---.250.129.5.Dial1.Weehawken1.Level3.net)
Date: January 25, 2005 07:59AM
It does not take much, so be carefull of how much you put in
www.willierods.com Re: Tap pigments
Posted by:
Mitch Bergquist
(---.dialup.scc.net)
Date: January 25, 2005 01:22PM
Can you please tell where I I can get these Tap pigments.
Thank You for any info. you can give me, thanks Mitch Bergquist Re: Tap pigments
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: January 25, 2005 01:53PM
Mitch,
[www.tapplastics.com] You can also use Testor's model paints but you need to let them settle good and more as much of the solvent off as you can Mike Sorry, only registered users may post in this forum.
|