SPONSORS
2024 ICRBE EXPO |
Bellinger uplocking for a #5 rod
Posted by:
Sakari Siipilehto
(---.adsl-net.finnetcom.net)
Date: January 17, 2005 05:52AM
Hi.
I'm going to build couple of five weights and I've got two Bellinger reel seats in mind: ULTB660NS and ULTB680NS. I just don't know which one to go with - I'm wondering about the reel foot fitting in. Also, from the Bellinger site it seems that the 680 has a machined type upper reel foot mount. In other places where I've seen pictures of this seat the mount is of a pressed type which is something I really don't like. Has this recently changed? Cheers, -Sakari Re: Bellinger uplocking for a #5 rod
Posted by:
Anonymous User
(Moderator)
Date: January 17, 2005 09:46AM
Your best bet on this matter would be to contact Bellinger and ask directly. They would have the information you request. Just shoot them an email and ask.
........................ Re: Bellinger uplocking for a #5 rod
Posted by:
Sakari Siipilehto
(---.adsl-net.finnetcom.net)
Date: January 17, 2005 10:20AM
Question sent to mfg.
I'll report when I get an answer. -Sakari Re: Bellinger uplocking for a #5 rod
Posted by:
Sakari Siipilehto
(---.adsl-net.finnetcom.net)
Date: January 18, 2005 03:43AM
The ULTB 680 NS can take a larger foot and Bellinger are transitioning from pressed pocket type to machined hood with that model. One can get either one at the moment.
For additional info, the overall lengths of the seats are: ULTB 660 NS - 3 5/8" ULTB 680 NS - 3 3/4" Thus, the 680 is the one for me. Sorry, only registered users may post in this forum.
|