I've got 2 rods I want to wrap tomorrow but I do not have VW installed on my computers. All I need is for someone to get me the spacings for teh following 2 rods and post it for me. Yes, I can use the "old" way and figure it out, but it's just so easy to do with VW.

Rod #1 - GUSA 664DHX extended to 6'10
Butt diameter: 11
Tip diameter: 10
Length 175-200mm (this shoould be 4 or 5 repeats of teh pattern)

Rod #2 - Lami XC78H extended to 6'10
Butt: 11.25
Tip: 10.25
Length - 175-200

Just list the cumulative for the 0 & 180 axis, it would be much appreciated. Thanks.

Edited 2 time(s). Last edit at 01/11/2005 01:10AM by Ron Walter.

Billy,


If I correctly followed the directions you sent me this is what
I get:

Butt = 11
Tip = 10
+6 = 197.92

Butt = 11.5
Tip = 10.25
+5 = 170.82
+6 = 204.99

I hope I got this right!

You should get those handouts published. Why not RodMaker?

Ron

Billy,
If I correctly followed the directions you sent me this is what
I get:

Butt = 11
Tip = 10
+6 = 197.92

Butt = 11.5
Tip = 10.25
+5 = 170.82
+6 = 204.99

I hope I got this right!

You should get those handouts published. Why not RodMaker?

Ron

Billy, try this:

Rod #1
Butt 11
Tip 10

Length:
4 repeats = 132mm,
0 deg = 31.4, 63.9, 97.4, 131.9
180 deg = 15.7, 47.6, 80.6, 114.7, 131.9

5 repeats = 165mm,
0 deg = 31.4, 63.6, 96.6, 130.4, 164.9
180 deg = 15.7, 47.5, 80.1, 113.5, 147.7, 164.9

6 repeats = 198mm
0 deg = 31.4, 63.5, 96.1, 129.4, 163.4, 197.9
180 deg = 15.7, 47.4, 79.8, 112.8, 146.4, 180.6, 197.9


Rod #2
Butt 11.25
Tip 10.25

Length

5 repeats = 169
0 deg = 32.2, 65.2, 99, 133.5, 168.9
180 deg = 16.1, 48.7, 82.1, 116.2, 151.2, 168.9

6 repeats = 203
0 deg = 32.2, 65, 98.5, 132.6, 167.3, 202.6
180 deg = 16.1, 48.6, 81.8, 115.5, 149.9, 185, 202.6

Regards
DB

Dave - thanks.

Ron, I needed the Spacings, not the entire length of the wrap. I do appreciate you help though, thank you.

Regarding the write-ups - If I was asked to submit them for review in Rodmaker, I would do so. I hope you can use it to assist you in your teaching.