SPONSORS
2024 ICRBE EXPO |
cork check
Posted by:
stephen barnes
(---.cache.pol.co.uk)
Date: December 29, 2004 03:39PM
I am building my first saltwater fly rod and am wondering what sort of cork check to use at the end of the handle.I normally use nickel-silver but guess that it would suffer from corrosion.Presumably anodized alluminium would be OK because that is whay we use in our reel fittings,or does it have to be plastic or rubber to be absolutely sure? Re: cork check
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: December 29, 2004 03:47PM
Might be a good time to try one with Rod Bond and some colored pigment?? Make one of your own?? Re: cork check
Posted by:
bill boettcher
(---.248.70.87.Dial1.Weehawken1.Level3.net)
Date: December 29, 2004 03:58PM
Hay Putter, that's my line? LOL Re: cork check
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: December 29, 2004 04:26PM
Once in a while I'll beat ya to the punch (especially if it's spiked) :) Re: cork check
Posted by:
bill boettcher
(---.248.70.87.Dial1.Weehawken1.Level3.net)
Date: December 29, 2004 04:43PM
I'll drink to that Re: cork check
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 29, 2004 05:06PM
Randy told me that you'll drink to anything, Bill!!!!!!! Re: cork check
Posted by:
Anonymous User
(202.138.16.---)
Date: December 29, 2004 07:05PM
Cold beer time I think.
Re: cork check
Posted by:
bill boettcher
(---.250.45.212.Dial1.Weehawken1.Level3.net)
Date: December 29, 2004 11:21PM
Hay guys your making me thursty??!!
This bud's for me Sorry, only registered users may post in this forum.
|