SPONSORS
2024 ICRBE EXPO |
Just wanna know what everyone likes?
Posted by:
John Carlton
(---.bc.dl.cox.net)
Date: December 26, 2004 08:39PM
What do you guys like to use for a finish over you decals? Re: Just wanna know what everyone likes?
Posted by:
John Dow
(---.snet.net)
Date: December 26, 2004 08:45PM
A coat of 811 CP , and any epoxy ecept Permagloss for the decal area. JD Got Fish ? Re: Just wanna know what everyone likes?
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 26, 2004 08:49PM
Whatever I use on the rest. Usually LS High Build. I use Decal Connection decals and never put anything over them besides my finish
Mike Re: Just wanna know what everyone likes?
Posted by:
Ray Zarychta
(---.ri.ri.cox.net)
Date: December 26, 2004 09:27PM
Forgot my full name on previuos post.
If it's waterslide a coat of decal setting solution thinned 50% and then my wrap finish, AMTAK Clear Coat in three thin applications. Self adhesive, just the AMTAK finish. Re: Just wanna know what everyone likes?
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: December 26, 2004 09:39PM
Fish decals- I put a coat of Krylon spray and then 2 part rod finish (fish decals like to "fish-eye" otherwise).
Waterslides- I use micro sol and then 2 part rod finish. Putter Re: Just wanna know what everyone likes?
Posted by:
Stan Gregory
(---.mynetrocks.com)
Date: December 26, 2004 10:00PM
First a thin coat of LS Hi-Build over the decal area, cured overnite. Then MicroSol, decal and a thicker coat of LS Hi-Build.
Stan Re: Just wanna know what everyone likes?
Posted by:
Mick McComesky
(---.nas3.saint-louis1.mo.us.da.qwest.net)
Date: December 27, 2004 12:19AM
I apply finish, then the decal, then CP, then permagloss. I like the "floating" look it gives. Sorry, only registered users may post in this forum.
|