SPONSORS
2024 ICRBE EXPO |
New Guide Concept Stripper Size for Daiwa SS-II 2500
Posted by:
Glenn Swor
(---.dckrsn01.tn.comcast.net)
Date: December 23, 2004 08:40AM
Looking for info from anyone who has set up the New Guide Concept for this particular reel. What size stripper guide did you use? I am building a 7' GUSA C703 (spinning), and I bought a size 30 stripper guide based on roughly half the diameter of the spool size for this reel. A 25 is slightly less than the spool's half-size while a 30 is slightly larger. Using the 30, I end up with the guide only 13" above the reel. Going with the 25 stripper, it lands 23" above the reel which seems more normal to me. I am using a TN handle, and my intersect point is 16" from the tip. If I use the size 25 guide, will line slap and/or build-up be a problem? I am using SIC guides. I will test cast, but were a little icy here at the moment.
Thanks in advance for all replies and Happy Holidays, Glenn Swor Re: New Guide Concept Stripper Size for Daiwa SS-II 2500
Posted by:
Anonymous User
(Moderator)
Date: December 23, 2004 08:47AM
The 25 will be better. 13 inches is too close. 19 to 22 is about perfect, but 23 is not out of line.
................ Re: New Guide Concept Stripper Size for Daiwa SS-II 2500
Posted by:
George Thurston
(---.faa.gov)
Date: December 23, 2004 09:22AM
I concurr.
Got the a SSII 2000 on a 6'3" rod w/ a 25 stripper at about 21". Awesome!! Sorry, only registered users may post in this forum.
|