I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Quickcoat UV
Posted by: Robin Schleien (69.196.49.---)
Date: December 16, 2004 03:16PM

Hello all -

Some time ago in a RodMaker article, there was a report on the Quickcoat system - using UV to cure urethane. Has anyone tried this approach and is the UV lamp still available? I've not been able to find the supplier. Thanks!!

Options: ReplyQuote
Re: Quickcoat UV
Posted by: Tom Kirkman (Moderator)
Date: December 16, 2004 04:24PM

Merrick Tackle was the supplier. Their link is to the left.

........



Edited 1 time(s). Last edit at 12/16/2004 07:38PM by Tom Kirkman.

Options: ReplyQuote
Re: Quickcoat UV
Posted by: Andrew McDermott (199.232.151.---)
Date: December 16, 2004 04:48PM

Jim Chambers from Connecticut was or is the rep. He is also Seekers rep for the Norhteast. I do not have his info infront of me right now, but you can look for a link at seekerrods.com.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster