SPONSORS
2024 ICRBE EXPO |
epoxy still good after a year?
Posted by:
John Chaney
(---.dsl.kscymo.swbell.net)
Date: December 08, 2004 03:49PM
Well it's been a little over a year since I was on this board. I bought and restored a International Scout. Now that is done and I need to make a couple of rods. Is my LS supreme still good? It has been in the bottles stored in a closet. Thanks, John Chaney p.s. in case you were interested in my non-fishing prodject [www.pcspest.com] Re: epoxy still good after a year?
Posted by:
Chris Catignani
(---.vitalchek.com)
Date: December 08, 2004 04:05PM
Very nice John...I think your LS should be fine. Re: epoxy still good after a year?
Posted by:
Tom Kirkman
(---.152.54.234.Dial1.Atlanta1.Level3.net)
Date: December 08, 2004 04:29PM
For all intents and purposes, epoxy never goes bad. Should the resin crystalize, you can just heat it with a few short 8 to 10 second blasts in the microwave or sit the bottle in a pan of very hot water for a few minutes. It will return to like new condition. ....... Re: epoxy still good after a year?
Posted by:
John Chaney
(---.dsl.kscymo.swbell.net)
Date: December 08, 2004 04:40PM
Thanks guys. John Chaney Re: epoxy still good after a year?
Posted by:
Dean Veltman
(---.lax.untd.com)
Date: December 08, 2004 09:08PM
Just make sure that it is still clear. I had some that sat in my garage for a year, never crystalized, but turned very, very yellow. Mixed it up and it cured fine in the cup, but way to yellow to use. Re: epoxy still good after a year?
Posted by:
Doug Errett
(---.ip.cathedral.org)
Date: December 09, 2004 08:47AM
I hope yopu are gonna build a few surf rods and get out on the beach with that Scout...sweet beach ride. Sorry, only registered users may post in this forum.
|