SPONSORS
2024 ICRBE EXPO |
Wild thread color with Rainshadow?
Posted by:
Keith Tymchuk
(198.237.218.---)
Date: December 07, 2004 07:14PM
Next project will be to redo an 8 ft 4 wt 3 pc Rainshadow with ceramics. Anybody have any different...perhaps kind of wild...color combo's for the thread work on the green blank. Keith Re: Wild thread color with Rainshadow?
Posted by:
larry pirrone
(---.los-angeles-61-63rs.ca.dial-access.att.net)
Date: December 07, 2004 07:20PM
don't know if its wild, but i really like garnet with silver inlays. the garnet with no CP turns to amethyst. very pretty. Re: Wild thread color with Rainshadow?
Posted by:
bill boettcher
(---.250.147.241.Dial1.Weehawken1.Level3.net)
Date: December 07, 2004 08:49PM
Try a little gold. Think it is #200 no CP Pack tight Re: Wild thread color with Rainshadow?
Posted by:
kevin Kresowaty
(---.nwcspa.adelphia.net)
Date: December 07, 2004 08:50PM
Yeah, garnet or red without cp looks really sharp on the green blanks. I also like using the red or garnet as the trim on a dark green wrap. Kevin Re: Wild thread color with Rainshadow?
Posted by:
Bill Stevens
(---.proxy.aol.com)
Date: December 07, 2004 08:51PM
Wild Color!! Right up my alley - Mardi Gras Colors - Look at the picture of the mardi gras marble on the Photo Board. Mr. Vivona said it looked like a spot he had on his carpet after a wild party. Purple - Green - Gold with a Black Mask - I have some spare face mask decals from Decal Connection if you need one. Gon Fishn Re: Wild thread color with Rainshadow?
Posted by:
Ralph Jones
(---.att.net)
Date: December 07, 2004 09:15PM
Goodbrod #638 with a thin metalic trim ring to match the guide or reelseat hardware. This thread looks like one of those bright blue dragonflies if you do it right. Ralph Re: Wild thread color with Rainshadow?
Posted by:
Ladd Flock
(---.chvlva.adelphia.net)
Date: December 07, 2004 09:36PM
Keith, I did a Rainshadow with deep purple wraps with light gray inset wraps and silver metallic trim bands using chrome alconites a while back. It was an old spool of purple from the late 80s. The newer purples aren't as deep. It looked awesome in the sunlight. Wish I had snapped a pic. I am finishing up this exact blank now for my brother in-law. I used chrome alconites, chestnut wraps with tan insets and silver metallic trim banks on the hook keeper wraps and stripper. 2 coats of 811. It has no winding check, fenwick style grip and a downlocking seat with walnut insert. Very retro,very cool. It reminds me of the rods I saw at Abercrombie & Fitch as a kid in the early seventies. (Back when they had a shotgun case as far as the eye could see... Far cry from their stores now!) I'll be adding an inscription tonight using silver ink and a B-6 speedball nib. Can't wait to give it to him. Go wild, Ladd Re: Wild thread color with Rainshadow?
Posted by:
Gerald McCasland
(---.cable.mindspring.com)
Date: December 08, 2004 08:48AM
One of Angler's Workshop's house tread color is called Evergreen. To me it looks like a dark olive green. It along with Sulky copper meralic trim and inlays looks realy sharp on any green blank. Later, Gerald Mc Re: Wild thread color with Rainshadow?
Posted by:
Jesse Buky
(---.exis.net)
Date: December 08, 2004 09:58AM
Wrap every guide a different color and do a rainbow type fancy wrap. Jesse Re: Wild thread color with Rainshadow?
Posted by:
Robert Box
(---.adt.com)
Date: December 08, 2004 07:16PM
Regular Goldenrod without CP. It turns super clear but gives a natural look against the green of the blank. Looks even better in the sunlight. Be sure to pack it tight and heat it well to get the bubbles in the tunnels out RB Sorry, only registered users may post in this forum.
|