SPONSORS
2024 ICRBE EXPO |
rod suport wheels
Posted by:
Rick keith
(---.227.230.178.col.mi.chartermi.net)
Date: December 06, 2004 08:41PM
Where can you get theys wheels? Re: rod suport wheels
Posted by:
Richard's Rod & Reel
(---.tbaytel.net)
Date: December 06, 2004 08:48PM
Rick, Are these the small round white wheels that you need for the supports on the wrapping machines like Rodsmith? Most vendors would have these that sell the power wrappers. I usually manage to keep these in stock also. Rich Garbowski Richard's Rod & Reel Re: rod suport wheels
Posted by:
Rick keith
(---.227.230.178.col.mi.chartermi.net)
Date: December 06, 2004 09:29PM
yes that the ones,thanks i will call Post Removed
Posted by:
wally wachi sr.
(---.dsl.irvnca.pacbell.net)
Date: December 06, 2004 09:46PM
Post Removed. Invalid email address. Re: rod suport wheels
Posted by:
Steve Satterfield
(---.proxy.aol.com)
Date: December 06, 2004 11:57PM
any Truevalue hardware store will have nylon roller berring for screen doors. Put a rubber O ring around it and you have a rod roller. I used rollblade wheels and like them better, but dont use used wheels there is dirt and grit pressed into the rubber . Steve Sorry, only registered users may post in this forum.
|