SPONSORS
2024 ICRBE EXPO |
Wood turning info
Posted by:
Tom Church
(---.ij.net)
Date: November 25, 2004 08:36AM
A friend of mine gave me a lathe and set of tools (a bit rusty) and I am looking for any info on using it. It is made by Chicago Tool and is very basic. Also info on tool sharpening. Thanks & Happy Thanksgiving Tom Re: Wood turning info
Posted by:
Tom Kirkman
(---.152.54.123.Dial1.Atlanta1.Level3.net)
Date: November 25, 2004 09:15AM
Andy Dear's new DVD would get you off on the right foot. A good investment for any rod builder new to the lathe and associated tools and how to use sharpen and use them. Use the link to the left for Lamar Reel Seats. ......... Re: Wood turning info
Posted by:
Andy Dear
(---.dsl.snantx.swbell.net)
Date: November 25, 2004 10:27AM
Tom, The DVD will definately reduce your learning curve quite a bit. Feel free to contact me if you have any questions! Andy Dear Lamar Reel Seats www.lamarreelseats.com Re: Wood turning info
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: November 25, 2004 07:05PM
I can vouch for the DVD. It's great and was (and still is) a big help to me! Mike Sorry, only registered users may post in this forum.
|