I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Matrix Components/blanks
Posted by: Phil Richmond (---.centcom.mil)
Date: November 21, 2004 09:39PM

Anyone seen them yet? The prices look decent, and the pics look good. Wondering how the actions and blanks will compare to the Forecast line up.

The handles look interesting, I hate killing time screwing up handles. I'm looking forward to seeing what these things have to offer.

Phil

Options: ReplyQuote
Re: Matrix Components/blanks
Posted by: William Colby (---.ipt.aol.com)
Date: November 21, 2004 09:53PM

I think these are much higher end blanks than the Forecast line. I've seen 3 as of last week and I thought they were great. The matrix part is interesting but not quite what I thought it would look like. But they blanks really do feel good and are pretty light for their amount of stiffness. I have not seen the handles in person yet.

Options: ReplyQuote
Re: Matrix Components/blanks
Posted by: Aaron Cavanaugh (---.mn.client2.attbi.com)
Date: November 21, 2004 10:25PM

Are you talking about the American Tackle Matrix line? I've been wondering the same thing, too.

Options: ReplyQuote
Re: Matrix Components/blanks
Posted by: Phil Richmond (---.tampabay.rr.com)
Date: November 22, 2004 07:12AM

Yes, the American tackle.

Options: ReplyQuote
Re: Matrix Components/blanks
Posted by: Joe Meehan (---.ne.client2.attbi.com)
Date: November 22, 2004 01:47PM

Hi Phil, I posted this as a response regarding our new Matrix system. Something in here may help.

Regards, Joe

Hi Guys,

These blanks haven't been out very long so there may not be a ton of feedback. I can tell you the response has been nothing short of awesome however. They're going to be a huge hit.

The butt sections are very strong. The woven twill increases hoop strength thus increasing power. The unidirectional fibers allow us to really dial in the actions. It gives you the best of both worlds.

Here is some info we wrote up for catalog descriptions.

American Matrix Series – Fuses the beauty of a woven twill graphite material with the traditional intermediate modulus blank design. The result is a cutting edge blank and the first of its kind to be offered to rod builders. The “Matrix” material adds power and sensitivity to the butt section without inhibiting the performance of the unidirectional tip section. Presented in an emerald green gloss with matching graphite twill matrix handles and reel seat inserts this series brings trend setting to a whole new level.

ATC's patented Vetre Handle System (shipping Jan 15th) transforms the beauty of their emerald green woven Matrix twill into a durable, ultra light and sensitive carbon rod handle that will match any American Matrix rod blank. An up-locking woven graphite grip assembly (mounted the same as any reel seat), secures your reel into the molded graphite seat for both spinning and casting models. Use without a foregrip allows direct hand contact with the blank adding additional sensitivity to this already sensitive and durable woven tube material. This handle provides optimum performance and a beautiful monochromatic look.

The matching American Matrix fly and spinning reel seats (shipping Dec 15th) are the perfect compliment to their high performance blanks. These seats match up the beauty of ATC's exclusive emerald green woven twill with an insert that is not only beautiful but light weight and durable. They are a great way to finish off the most unique rod blank ever offered.

I hope that helps.

Warmest regards, Joe Meehan

Options: ReplyQuote
Re: Matrix Components/blanks
Posted by: Rick Koontz (65.196.57.---)
Date: November 23, 2004 11:45AM

Hey Joe,

Where can I see a picture of the Matrix stuff? I couldn't find it on your website.

Thanks,
Rick

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster