SPONSORS
2024 ICRBE EXPO |
Valspar Polyurethane Clear
Posted by:
bill boettcher
(---.250.147.89.Dial1.Weehawken1.Level3.net)
Date: November 17, 2004 08:38AM
I started to play with this stuff. I like it. Similar to another product but I also find that there is several typs of Activators that can be used with it. Fast to slow. Data sheets say no flex agent needed. I have put several coats on a blank and used the fast activator. I have ordered the slow and think it will work better. Finally some thing that goes on easy, clear, is flexible, hard as a rock, and I have some control of the set up time in different conditions. Re: Valspar Polyurethane Clear
Posted by:
bill boettcher
(---.250.147.89.Dial1.Weehawken1.Level3.net)
Date: November 17, 2004 08:43AM
Nice and thin also. Should make a good thread coating also! Re: Valspar Polyurethane Clear
Posted by:
Larry Thomas
(---.chcgil2.dsl-verizon.net)
Date: November 17, 2004 11:23AM
I assume this is in liquid form. How do you apply it? Re: Valspar Polyurethane Clear
Posted by:
bill boettcher
(---.250.129.228.Dial1.Weehawken1.Level3.net)
Date: November 18, 2004 08:21AM
It is used in the Auto Body field. It is thin, can be sprayed, brushed and whiped on, It is a clear for coating Auto Paints. I have just ordered the slower activator. Got to try that There are several types of activators for it Re: Valspar Polyurethane Clear
Posted by:
Ralph Jones
(---.att.net)
Date: November 18, 2004 06:11PM
Bill, will it not cure without an activator? ralph Re: Valspar Polyurethane Clear
Posted by:
Fred Schoenduby
(---.msn.com)
Date: November 18, 2004 06:49PM
Hi Bill The Valspar sounds great...where do I get it from ??? Any info would be most welcome. Fred Re: Valspar Polyurethane Clear
Posted by:
bill boettcher
(---.250.9.170.Dial1.Weehawken1.Level3.net)
Date: November 19, 2004 04:51PM
This needs the Activator for it to dry But does not need the flex agent so I guess you would call it a two part Here is the site where I got mine. [www.autopaintdirect.com] Sorry, only registered users may post in this forum.
|