I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

conversion for tip tops
Posted by: Myles Boon (---.a.004.brs.iprimus.net.au)
Date: November 15, 2004 07:39PM

G'day all, trying to find a conversion chart for fuji tip tops. Need to convert imperial back to metric.

Myles

Options: ReplyQuote
Re: conversion for tip tops
Posted by: Ron Walter (---.mdsnwi.tds.net)
Date: November 15, 2004 08:17PM

For a conversion chart to change anything to anything else, go to:

[www.esbcalc.com]

Keep it on your desktop.

Options: ReplyQuote
Re: conversion for tip tops
Posted by: Milton (Hank)Aldridge (---.maine.rr.com)
Date: November 15, 2004 09:02PM

Myles,

Try this site [www.onlineconversion.com]

Hank
Wells, ME

Options: ReplyQuote
Re: conversion for tip tops
Posted by: Mick McComesky (---.nas3.saint-louis1.mo.us.da.qwest.net)
Date: November 15, 2004 09:09PM

The hard way is divide the tip by 64 then divide by .039 to get mm.

A couple minutes with a calculator you can set up your own chart.

The easy way is to start at a tip size of 4 which is about 1.6mm. For each .5 of tip size, add .2 mm

Almost got those test samples done. I kept getting sidetracked but I think one more coat of PG and they should be ready to go. Hopefully by the weeked I can get them shipped to you.

Options: ReplyQuote
Re: conversion for tip tops
Posted by: Myles Boon (---.b.003.brs.iprimus.net.au)
Date: November 15, 2004 10:28PM

thanks guys
Myles

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster