SPONSORS
2024 ICRBE EXPO |
conversion for tip tops
Posted by:
Myles Boon
(---.a.004.brs.iprimus.net.au)
Date: November 15, 2004 07:39PM
G'day all, trying to find a conversion chart for fuji tip tops. Need to convert imperial back to metric. Myles Re: conversion for tip tops
Posted by:
Ron Walter
(---.mdsnwi.tds.net)
Date: November 15, 2004 08:17PM
For a conversion chart to change anything to anything else, go to: [www.esbcalc.com] Keep it on your desktop. Re: conversion for tip tops
Posted by:
Milton (Hank)Aldridge
(---.maine.rr.com)
Date: November 15, 2004 09:02PM Re: conversion for tip tops
Posted by:
Mick McComesky
(---.nas3.saint-louis1.mo.us.da.qwest.net)
Date: November 15, 2004 09:09PM
The hard way is divide the tip by 64 then divide by .039 to get mm. A couple minutes with a calculator you can set up your own chart. The easy way is to start at a tip size of 4 which is about 1.6mm. For each .5 of tip size, add .2 mm Almost got those test samples done. I kept getting sidetracked but I think one more coat of PG and they should be ready to go. Hopefully by the weeked I can get them shipped to you. Re: conversion for tip tops
Posted by:
Myles Boon
(---.b.003.brs.iprimus.net.au)
Date: November 15, 2004 10:28PM
thanks guys Myles Sorry, only registered users may post in this forum.
|