SPONSORS
2024 ICRBE EXPO |
Long drill bits
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: November 13, 2004 08:27PM
Does anyone know where to find long 8' or more woodworking bits (pilot point type) suitable for doing handles? I have not been able to find them anywhere, even in woodworking catalogs. I started this as a new thread so it would be easy for future searchers to find it Mike Re: Long drill bits
Posted by:
William Colby
(---.ipt.aol.com)
Date: November 13, 2004 08:29PM
8 feet? Or 8 inches? Both would be hard to come by but I think the 8 feet bits would be nearly impossible. Re: Long drill bits
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: November 13, 2004 08:44PM
Oops!!!! inches!! I want to be able to bore a handle out with out turning it around in the chuck and "hopeing" to meet in the middle and be in line Mike Re: Long drill bits
Posted by:
William Colby
(---.ipt.aol.com)
Date: November 13, 2004 09:03PM
If you bore after you turn you can swap ends in a self centering chuck and meet darn near in the center every time. If you bore first on square stock then I can see a problem but don't have an answer for you. Re: Long drill bits
Posted by:
jay Dubay
(---.try.wideopenwest.com)
Date: November 13, 2004 09:07PM
Hello Mike, do a search on Google, {12" Drill Bits} lots of them there here is a sample. [www.toolking.com] Re: Long drill bits
Posted by:
jay Dubay
(---.try.wideopenwest.com)
Date: November 13, 2004 09:22PM
[store.yahoo.com] Mike I found one here that is 3/8 x 54" must be for Tim on Tool Time, Ha! They also have 12" here [toolsplus.bock.com] Good luck and have fun, Jay Re: Long drill bits
Posted by:
bill boettcher
(---.an3.nyc41.da.uu.net)
Date: November 13, 2004 11:09PM
I have gotten some about a foot long at Home Depot Re: Long drill bits
Posted by:
Ellis Mendiola
(---.dsl.hstntx.swbell.net)
Date: November 13, 2004 11:32PM
I went to Sears to buy a drill press this evening and saw some long drill bits there. Re: Long drill bits
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: November 14, 2004 10:04AM
Thanks a lot guys!!!!!!! Mike Re: Long drill bits
Posted by:
Ron Hossack
(---.pimaco01.az.comcast.net)
Date: November 14, 2004 08:45PM
Mike Barkley wrote: > Does anyone know where to find long 8' or more woodworking bits I sent you email Mike Re: Long drill bits
Posted by:
Ken Preston
(---.longhl01.md.comcast.net)
Date: November 14, 2004 08:54PM
Mike Home Depot in Columbia (on your way home)... I was there Saturday and found 18" long x 1/2" and 18" long x 3/4" ... Ken Re: Long drill bits
Posted by:
Scott Giarratano
(---.dsl.hstntx.swbell.net)
Date: November 15, 2004 10:27PM
You can purchase "glow rods" which are used for installing cables and other wiring through walls in lengths up to 6 foot. I am not sure if they are self centering, I do know that they are highly flexable. SG Sorry, only registered users may post in this forum.
|