SPONSORS
2024 ICRBE EXPO |
Large ID Cork?
Posted by:
Nick Brunetti
(---.ipt.aol.com)
Date: February 27, 2002 12:09AM
I have been asked to build a rod using cork grips. Normally not a problem, but the rod I will be using will probably be a Pac Bay JS80M-B, an 8' medium power blank. It's butt diameter is 0.95. Does anyone make butt grips and fore grips to accomodate this large diameter? Or are there cork rings available in that ID? Or am I looking at a rod that is getting eva? thanks, nick Re: Large ID Cork?
Posted by:
Andy Snedden
(---.bctel.ca)
Date: February 27, 2002 01:25AM
We have 1.25" dia. rings with a 0.75" , 0.625", 0.375" and 0.25" bore and 1.5" dia. rings with a 1.0", 0.75" , 0.625", 0.375" and 0.25" bore. Sorry we don't have pre-made grips with the bore dia. you require. EVA or Hyphalon are certainly options. You can get EVA in a wide range of colour options from Mudhole. Phone (Toll-free) 1-877-303-9331 Custom Rodbuilders Supplies (link on left- Rodbuilder Supplies) Andy Snedden Re: Large ID Cork?
Posted by:
Steve Bohrer
(---.ipt.aol.com)
Date: February 27, 2002 10:01AM
Mudhole has 2 inch diameter cork rings. Re: Large ID Cork?
Posted by:
Ron Schneider
(---.cox-internet.com)
Date: March 02, 2002 09:22AM
Schneider's (Link on left) has 5" finished cork sections in 3/4 or 1" ID [66.34.4.59] Sorry, only registered users may post in this forum.
|