SPONSORS
2024 ICRBE EXPO |
Anybody know a websitethat sells pulley wheels
Posted by:
Kyle Ligon
(---.austin.rr.com)
Date: February 19, 2002 03:08PM
I'm working up a new model of my power wrapper and need to gear down the motor a little.I need some 1"& 6"+- dia. wheels with 1/4" shaft holes.Thanks for any help...................Kyle Re: Anybody know a websitethat sells pulley wheels
Posted by:
Nick Brunetti
(---.proxy.aol.com)
Date: February 19, 2002 03:56PM
I know that Clemens Tackle has .95" bearing inside nylon pulleys with oring "tires". I'm sure you can just remove the "tires" to create a trough for a drive belt. The 6" on the other hand....I don't know about. I do know that the Pac Bay makes a wrapper pulley that's 4". Don't know if that will work or not. Try calling your local electronics repair shop (i.e.: phonograph pulleys) also check some hobby shops. I have looked myself at allelectronics.com but have found nothing suitable to use on my setup either. Good luck, let me know when you find another source. nick I found some but they're way to expensive
Posted by:
Kyle Ligon
(---.austin.rr.com)
Date: February 19, 2002 04:46PM
at $ 17+shipping they're just too much.If your interested try www.smallparts.com They have lots of small parts,LOL!.................Kyle Re: Anybody know a websitethat sells pulley wheels
Posted by:
Kelly Verge
(---.pn.at.cox.net)
Date: February 19, 2002 04:53PM
I haven't looked here, but you might want to check www.grainger.com Sorry, only registered users may post in this forum.
|