SPONSORS
2024 ICRBE EXPO |
cork
Posted by:
Jim Reed
(---.woh.rr.com)
Date: February 19, 2002 02:59AM
What do you use to clean cork?(light sanding or chemical) How do most of you get a straight edge on shrink grips, I was thinking of getting a straight edge paper cutter. Re: cork
Posted by:
Solana Rosa
(---.salta.sinectis.com.ar)
Date: February 19, 2002 06:20AM
Light soap! with plenty of water ! If need more than that, get a "Stiff Brush". Hope this Helps. Re: cork
Posted by:
Neal Cissel
(---.ph.ph.cox.net)
Date: February 19, 2002 08:42AM
A SOS pad will work too but the best is to put grip under warm water and rub then let the rod handle dry over night. Or you can use a green scub pad with L.O.C. works great too. Hope this was helpful, Neal Cissel w/Neal's Fishing Products Re: cork
Posted by:
Jim Johns
(---.boeing.com)
Date: February 19, 2002 09:13AM
Try using Simple Green. It's a bio-degradable spray cleaner that's available in the automotive department of Wal-Mart. Spray it on, scrub with a soft brush (I use a brush made to clean fingernails), rinse, and let it dry. The cork will look like new. Sorry, only registered users may post in this forum.
|