SPONSORS
2024 ICRBE EXPO |
Rodbuilding Magazine
Posted by:
Brian Patterson
(---.coatsv01.pa.comcast.net)
Date: February 13, 2002 07:51PM
I subscribed to Rodbuilding magazine on Feb. 2nd and was wondering what was the cut-off date for this issue. Re: Rodbuilding Magazine
Posted by:
William Colby
(---.proxy.aol.com)
Date: February 13, 2002 08:15PM
I do not know what the cut off date is, or if there is any such thing. I have not gotten my new issue yet and it is supposed to be delivered at the end of February so maybe your's is also on the way. This is assuming that you are talking about RodMaker Magazine. There was also a publication called the Rodcrafter Journal but I do not know if it is still published or if so what the last issue was. Somebody here could fill you in if that is the one you are talking about. Re: Rodbuilding Magazine
Posted by:
Brian Patterson
(---.coatsv01.pa.comcast.net)
Date: February 13, 2002 09:13PM
it was a typo on my part, i meant Rodmaker Magazine Re: Rodbuilding Magazine
Posted by:
Tom Kirkman
(---.dialsprint.net)
Date: February 14, 2002 09:47AM
Brian, I would expect you will see a copy within a week or so. ................ Re: Rodbuilding Magazine
Posted by:
Tony Savitsky
(---.pg.com)
Date: February 14, 2002 11:34AM
I just received my copy. You asked for feedback. The new protective cover worked fine for me. No damage at all. n=1 Re: Rodbuilding Magazine
Posted by:
Felix Cartagena
(---.rasserver.net)
Date: February 16, 2002 12:32AM
Still waiting for my copy :( Sorry, only registered users may post in this forum.
|