I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 1842 of 1896
Subject Views Posts  Started By  Last Post 
Flex Coat Lite UV 845  2  Ellis Mendiola  03/25/2002 08:30AM 
Last Post by Tom Kirkman
Shimano 951  3  Chris Coday  03/25/2002 08:25AM 
Last Post by David H. Parker
Noncurrent GLoomis IMX blanks wanted 1,019  2  Rob Winge  03/25/2002 07:22AM 
Last Post by John Burford
Varmac components, PacBay? 2,009  3  Jim Racela  03/24/2002 11:28PM 
Last Post by Neal Cissel
Rodsmith power wrapper 893  6  Tim Shaffer  03/24/2002 11:32AM 
Last Post by Tim Shaffer
old rod 853  1  ron flynn  03/24/2002 10:43AM 
Last Post by ron flynn
Question concerning Renzetti rod lathe 780  2  Charles DeGroot  03/24/2002 09:27AM 
Last Post by Tom Kirkman
Epoxy Winding Checks 2,448  8  Mike Callery  03/23/2002 09:39PM 
Last Post by Randy Pippin
Surf style grip 913  2  Andrew Eaton  03/23/2002 04:06PM 
Last Post by Tom Kirkman
Did I miss out? 834  3  Felix Cartagena  03/23/2002 01:08PM 
Last Post by Felix Cartagena
Loomis "Spring" Specials 776  1  Karen Hapka  03/23/2002 12:51PM 
Last Post by Karen Hapka
Water Slide Decals 1,075  6  John Burford  03/23/2002 12:20PM 
Last Post by Lance Dupre
Guides for King Salmon Rods 872  2  Richard Kauffman  03/23/2002 05:47AM 
Last Post by Robert Balcombe (REELMAN)
removing epoxy 1,523  7  Ray Jorgensen  03/23/2002 02:18AM 
Last Post by Alberto Bolan
flyrod blanks 938  5  kris geyssens  03/23/2002 12:19AM 
Last Post by John Gertz
Calstar website? 1,140  3  Charles Beamer  03/22/2002 09:22PM 
Last Post by Charles Beamer
graphite handles 988  6  Gary Niemchick  03/22/2002 06:10PM 
Last Post by Rich Garbowski
to brilliance cp users 1,186  10  Mark Gallihugh  03/22/2002 05:01PM 
Last Post by Tom Kirkman
Finish Problems 936  4  Mark Didlake  03/22/2002 04:54PM 
Last Post by Robert Balcombe (REELMAN)
Finishing a trout net 4,080  5  Elrod (Jon Jenkins)  03/22/2002 12:16PM 
Last Post by Mark Wendt
New ads 1,091  17  Tom Kirkman  03/22/2002 12:11PM 
Last Post by Glenn Ging
PacBay Alpine Rod Case and Rod Bags? 1,376  3  Bob Petti  03/22/2002 10:46AM 
Last Post by Rich Garbowski
loose threads 768  3  Clay Poindexter  03/22/2002 10:09AM 
Last Post by Clay Poindexter
Trimming the tip? 902  4  William White  03/22/2002 05:16AM 
Last Post by Patrick Vernacchio
"Crown" Cross Wrap 853  4  Nick Brunetti  03/22/2002 04:44AM 
Last Post by David Boyle
Tom Burst My Winston Football 1,158  7  Ellis Mendiola  03/22/2002 04:42AM 
Last Post by Patrick Vernacchio
WD-40 1,071  6  Nick Brunetti  03/22/2002 03:40AM 
Last Post by Patrick Vernacchio
9.5' guide spacing... 793  3  Gene Maxson  03/22/2002 03:37AM 
Last Post by paul blamire
D.M.WEAVING LOOM 772  2  john liebelt  03/22/2002 01:21AM 
Last Post by Jim Kastorff
rear grip and seat for light spin rod 1,067  4  John Lasky  03/21/2002 10:29PM 
Last Post by Ray Zarychta
Mystery rod 805  2  Brian Wilson  03/21/2002 10:08PM 
Last Post by Mike Ballard
Fuji ECS reel seat fit question 1,937  7  Bill Tune  03/21/2002 07:36PM 
Last Post by Bill Tune
Rods for Grandkids 1,021  8  Rick Lewis  03/21/2002 03:37PM 
Last Post by Chris Allen
Another question on spiral wrap guides 1,505  10  Ed Robinson  03/21/2002 01:20PM 
Last Post by Rich Garbowski
This site! 1,124  3  Chris Coday  03/21/2002 01:12PM 
Last Post by Chris Allen
Ask and you shall receive 878  2  Ellis Mendiola  03/21/2002 12:44PM 
Last Post by Ray Zarychta
Boring Wooden Inserts, Hosels, Butt Caps, etc. 894  2  Phil Ptak  03/21/2002 11:38AM 
Last Post by Tom Kirkman
Question for the moderator 914  5  Blaine Lusk  03/21/2002 11:17AM 
Last Post by Tom Kirkman
Satin finish Permagloss? 1,142  5  Neil Buchler  03/21/2002 11:16AM 
Last Post by John Lasky
Spinning rods... what to look for 1,744  4  Mike Rury  03/21/2002 10:22AM 
Last Post by Ed Sinn (mrsinbad)
Glue for cork? 875  6  Harald Runde  03/21/2002 08:35AM 
Last Post by John DeMartini
Hey Blaine,or anybody with a HarborFreight wood lathe 7,141  8  Kyle Ligon  03/21/2002 02:30AM 
Last Post by Buddy Sanders
Acrylic Resin 720  4  Blaine Lusk  03/21/2002 12:21AM 
Last Post by Blaine Lusk
travel rod 992  10  Greg Hileman  03/20/2002 11:42PM 
Last Post by Kerry Hansen
more balancing 1,120  8  matt lewis  03/20/2002 08:34PM 
Last Post by Bob Vasko
weaving jig 1,082  3  Nicholas Russo  03/20/2002 05:11PM 
Last Post by ART STAUFFER
Trim wraps real copper or metalic thread. 1,192  5  John Lasky  03/20/2002 03:21PM 
Last Post by Kyle Ligon
Quick Question for Tom Kirkman 891  3  Donald Kelly  03/20/2002 01:02PM 
Last Post by Donald Kelly
PermaGloss and coloring 833  1  Wesley Chappell  03/20/2002 12:40PM 
Last Post by Wesley Chappell
New FAQ section 739  1  Harry Boyd  03/20/2002 12:03PM 
Last Post by Harry Boyd
Current Page: 1842 of 1896
Options:
Webmaster