I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 1841 of 1896
Subject Views Posts  Started By  Last Post 
1/10 hp motor 878  3  John Chaney  03/27/2002 10:26PM 
Last Post by Fred Stowe (Fish Stix)
Removing/Replacing a reel seat? 824  5  Mark Didlake  03/27/2002 09:39PM 
Last Post by Mike Ballard
epoxy on guides 1,033  3  John Bailey  03/27/2002 08:27PM 
Last Post by Mike Ballard
Lathes - Drill or real? 1,856  8  Todd Forbes  03/27/2002 07:24PM 
Last Post by Keith Yang
Rebuilding Problems 790  3  Ralph Pepe  03/27/2002 05:45PM 
Last Post by Mike Bolt
Removing bubbles when coat has dryed 803  7  Alberto Bolan  03/27/2002 03:43PM 
Last Post by Alberto Bolan
St Croix Legend blanks have strange, 1,167  4  John Lasky  03/27/2002 03:06PM 
Last Post by John Lasky
Rebuilding Problems 818  1  Ralph Pepe  03/27/2002 03:00PM 
Last Post by Ralph Pepe
Coloring Blanks 774  4  William A. Boettcher Sr  03/27/2002 02:06PM 
Last Post by Dave Joseph
Boron composite blanks 737  4  Felix Cartagena  03/27/2002 09:08AM 
Last Post by Neal Cissel
LS Suppreme vs. Flex Coat Light 998  9  Butch North  03/27/2002 09:01AM 
Last Post by Tom Kirkman
Fighting Butt 676  2  Brian Wilson  03/27/2002 08:54AM 
Last Post by Tom Kirkman
REC guides 952  5  Barry Weaver  03/27/2002 08:45AM 
Last Post by Dick Thurston
How long? 847  2  Larry Copas  03/27/2002 08:42AM 
Last Post by Tom Kirkman
Fly rod blank 853  3  Brian Wilson  03/27/2002 08:36AM 
Last Post by Dick Thurston
Good blanks for bass rods. 763  7  Shawn Smith  03/27/2002 08:00AM 
Last Post by Dick Thurston
Pac Bay Blanks 786  2  Joel Goyette  03/27/2002 07:42AM 
Last Post by Dick Thurston
Loomis crankbait blanks? 647  4  Shawn Smith  03/27/2002 01:26AM 
Last Post by Mark Schulte
Re-wrapping 822  6  Peter Arnold  03/26/2002 11:06PM 
Last Post by Dick Thurston
Drying Time?? 670  4  William A. Boettcher Sr  03/26/2002 10:41PM 
Last Post by Dick Thurston
Hookhider Grip 1,076  2  Joe Brooks  03/26/2002 10:23PM 
Last Post by Chris Coday
Heads Up/ Re. counterfeit blanks    Pages: 1 2 3,746  22  Rich Garbowski  03/26/2002 10:22PM 
Last Post by David
shaded guide wraps 869  2  Steve Parks  03/26/2002 10:17PM 
Last Post by Mike Ballard
custom rods 953  10  eddie gunn  03/26/2002 08:46PM 
Last Post by Coach Paul Bagby
Which Blank ?? 875  3  Clint Doak  03/26/2002 07:44PM 
Last Post by Dick Thurston
Tubes/Bags for Multi Piece Rods 887  5  Lee Aitchison  03/26/2002 07:11PM 
Last Post by gary marquardt
LS supreme over Flex Coat? 1,048  6  Butch North  03/26/2002 06:16PM 
Last Post by Ed Thompson
Finishing wraps? 836  3  Mark Didlake  03/26/2002 06:15PM 
Last Post by Mark Didlake
Holding Top or Mid Blank Sections When Wrapping or Drying 999  3  Phil Ptak  03/26/2002 05:27PM 
Last Post by Mike Bolt
Thread color problem 949  5  Joe Marshall  03/26/2002 05:15PM 
Last Post by Goran Sandberg
how to 817  3  eddie gunn  03/26/2002 04:29PM 
Last Post by Chris Karp
finishing technique for beginners 775  1  Michael H Kennedy  03/26/2002 01:57PM 
Last Post by Michael H Kennedy
Test Casting 799  3  Joe Marshall  03/26/2002 01:49PM 
Last Post by Buddy Sanders
Recessed Reel Seats 816  3  Tom Piatt  03/26/2002 12:50PM 
Last Post by Tom Piatt
Installing EVA foam handles 977  3  Galen Briese  03/26/2002 10:39AM 
Last Post by Ellis Mendiola
"Inner Cast" blanks 1,185  11  Dave Lockman  03/26/2002 09:50AM 
Last Post by Scott Greenberg
Spine question 1,104  7  Dan Corbett  03/26/2002 09:25AM 
Last Post by Shawn Smith
Tackleworks in Marlin Magazine 756  2  Mike Ballard  03/26/2002 09:03AM 
Last Post by Tom Kirkman
Cork handle finish 1,265  5  Rob Longley  03/26/2002 06:40AM 
Last Post by Arthur kaplan
Drying motors discontinued -new source? 2,194  17  Steve Swadinsky  03/26/2002 06:11AM 
Last Post by Arthur kaplan
Spiral Wrapping? 951  4  Matt Gates  03/26/2002 12:21AM 
Last Post by Rich Garbowski
underwraps---coat before overwraps and guides placed? 1,338  5  Michael T Williams  03/25/2002 09:50PM 
Last Post by Hugh Miller
Guide placement (1st guide only) 1,271  5  David George  03/25/2002 09:14PM 
Last Post by Mike Ballard
S-glass Vs. Graphite 1,676  4  joseph bailleaux  03/25/2002 08:48PM 
Last Post by Ellis Mendiola
measuring U-40 rod bond 981  5  Michael H Kennedy  03/25/2002 08:06PM 
Last Post by William Colby
Postings, again 923  1  Tom Kirkman  03/25/2002 05:12PM 
Last Post by Tom Kirkman
"tacky" windings 738  4  Michael T Williams  03/25/2002 03:05PM 
Last Post by Randy Gerrick
Why would balancing harm effeciency? 1,211  5  Dean Veltman  03/25/2002 03:05PM 
Last Post by Dan Corbett
Amtak Epoxy 932  3  Ray Alston  03/25/2002 02:46PM 
Last Post by Larry Thomas
Rainshadow -matt/clear 1,288  4  mark goertzen  03/25/2002 12:41PM 
Last Post by Steve Rushing
Current Page: 1841 of 1896
Options:
Webmaster