I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods


Current Page: 4 of 8
Results 91 - 120 of 237
10 years ago
Jess Brindisi
boat is afloat and probably already fishing
Forum: rodboard
11 years ago
Jess Brindisi
I've heard of guys spraying pam...but have never seen it. I've also heard of guys using chapstick...but have never seen it. By the time the centerpin angler is loaded with various floats, beads, flies, jigs, 8 to 10 different sizes of shot, egg sacks in 3-4 different colors, ....a change of warm gloves, socks etc....extra spool.....a few layers of clothing.....the last thing he/she has room fo
Forum: rodboard
11 years ago
Jess Brindisi
Bill...partially correct.....not a fly rod....but the same length Because of the extreme temperatures that steelheaders fish in....the smallest guides often freeze long before the fisher's toes, fingers or nose. It is extremely annoying, especially on a 13' 6 rod to clear guides of ice before each and every cast. Therefore, builders use larger guides (size 8's) to combat the freezing. A ce
Forum: rodboard
11 years ago
Jess Brindisi
Maryann....shoot me an email since your is hidden.
Forum: rodboard
11 years ago
Jess Brindisi
Robert....I've built a centerpin rod using the exact same set up you have listed....BYAG's all the way out. Didn't find a need for the BLAG's. My thought was this....by the time the line goes through 10 #8 guides...it pretty much knows where it needs to go....and that is out the tip. BLAG's might lower the guide height to put it more in line the BFAT tip...but you are talking maybe 5mm lower?
Forum: rodboard
11 years ago
Jess Brindisi
I've listed this exact same stuff on fleabay before with great succcess. You would be amazed at what people are searching for out there. Any idea on the brands or types of parts? One of my side gigs is reel repair and restoration.
Forum: rodboard
11 years ago
Jess Brindisi
PUTTERS for wings/beers and some of the best steaks you can get..IMO ZIGGY's for live music FOOTHILLS Brewing Co for beer/food
Forum: rodboard
11 years ago
Jess Brindisi
Anybody know what type of guides these are? The top 3 rows have never been used, but the bottom row has seen some action.
Forum: rodboard
11 years ago
Jess Brindisi
Thanks Phil....we (the DC area) are elated!. It appears PERFECTION makes a heavy duty reel seat in black and silver....may have to check that one out.
Forum: rodboard
11 years ago
Jess Brindisi
Phil...I'm a skins fan, but not a gold fan. Prefer silver, pewter, platinum, and nickel
Forum: rodboard
11 years ago
Jess Brindisi
No particular immediate size needed. If aftco ,alps, Amtak would offer silver black....no worries. But to buy a silver and a black alps size 18 for $35 a piece would blow most budgets
Forum: rodboard
11 years ago
Jess Brindisi
How come most manufacturers only offer aluminum reel seats in all silver, or all black, but not a combination of silver and black? Most manufacturers have a gold/black combination available. With reel manufacturers like Avet, accurate, penn customs etc. offering silver as a color option it sure would be nice to have another choice in aluminum reel seats available. Anyone else feel my pain?
Forum: rodboard
11 years ago
Jess Brindisi
Hard to explain, but I put on decal like a bandaid with two pieces of decal backing. This keeps me from having finger prints anywhere on the decal. I hold the decal on its edges and slide a scrap price of backing inbetween the decal and its backing. Then peel off original backing and use it to grab the free end. Now you should have a decal suspended in the middle by two prices of backing. Make s
Forum: rodboard
11 years ago
Jess Brindisi
Not familiar with a hardy silex.....but will look at it. Look for a Milner, Paine falls, islander, mykiss, to name a few. Some have a "clicker" button I keep the reel from spinning during travel. A centerpin has no drag whatsoever....and no lever to put into free spool cause its always in freespool.
Forum: rodboard
11 years ago
Jess Brindisi
A center pin reel......picture a 4.5" or 5" fly reel that has zero drag. The reel runs on bearings or bushings and has zero drag. What this allows, along with a long rod, is for the bait to have a compete natural drift. Long rod allows for line to stay off the water. And also allows for a lite leader to be used to fight the fish...due to soft tip. The current takes the bai at the same
Forum: rodboard
11 years ago
Jess Brindisi
A center pin reel......picture a 4.5" or 5" fly reel that has zero drag. The reel runs on bearings or bushings and has zero drag. What this allows, along with a long rod, is for the bait to have a compete natural drift. Long rod allows for line to stay off the water. And also allows for a lite leader to be used to fight the fish...due to soft tip. The current takes the bai at the same
Forum: rodboard
11 years ago
Jess Brindisi
MHX 1562 or Rainshadow 1562 have been sucessful on many builds. CTS Afinity is the crem de la crem" like Frank said above.
Forum: rodboard
11 years ago
Jess Brindisi
Now it makes sense....thanks for the replies.
Forum: rodboard
11 years ago
Jess Brindisi
How does the 1/4" tape ensure a perpendicular cut to the blank?
Forum: rodboard
11 years ago
Jess Brindisi
Here's the deal. I've got a 6ft Gaff blank that has some taper to it. My goal is this - To make it a 4 piece Gaff blank that will screw together.....don't ask me how yet. Here's MY issue. Due to the taper....how do I ensure that my cut will be perpendicular to the blank? If I use a chop saw...and place the blank against the back rest...I won't get a 90 degree cut.....due to the taper.
Forum: rodboard
11 years ago
Jess Brindisi
What is everyone using for their deep drop swordfish blanks?
Forum: rodboard
11 years ago
Jess Brindisi
What size Aluminum gimbal will provide a smooth transition to an 8" smooth/slick butt? Description says the bottom OD of the slick butt is 1 3/8" and to use a size 4 gimbal with an OD of 1 1/4" Products are AMTAK. Is this the best fit? Anyone else wish the slick/smooth butt would come with 2 trim rings as opposed one?
Forum: rodboard
11 years ago
Jess Brindisi
sent you an email
Forum: rodboard
11 years ago
Jess Brindisi
Yup...that did it. thanks for the heads up.
Forum: rodboard
11 years ago
Jess Brindisi
Can the Flexcoat slip clutch be tightened up? Seems on rods that have bigger guides, the clutch doesn't stick enough when turning on the dryer leaving the guides on the bottom while the motor is still turning.... Hope this makes sense.
Forum: rodboard
12 years ago
Jess Brindisi
Thanks Guys...I appreciate the feedback.
Forum: rodboard
12 years ago
Jess Brindisi
Anyone ever dye bonding epoxy? What would happen if you added black pigment/dye/Testors to Rod Bond 2 part epoxy or ProPaste 2 part epoxy? Would it mess up the curing process?
Forum: rodboard
12 years ago
Jess Brindisi
Anyone have the capability to make Metallic RED decals? I need 2 or 3 Thanks Jesster
Forum: rodboard
12 years ago
Jess Brindisi
What thread is everyone using to match Penn's Gold?
Forum: rodboard
12 years ago
Jess Brindisi
John Most of Those mystery blanks were from Advanced Tubular Composite (ATC). A quick (very quick) google search turned up a few ATC results. I didn't spend the time to find any blank specs. If Scott Parsons reads this...he might be able to post up the sheets that were hanging from the blue barrells. A tip measurement and butt measurement comparison might get you close.
Forum: rodboard
Current Page: 4 of 8

Webmaster