SPONSORS
2024 ICRBE EXPO |
Results 91 - 109 of 109
15 years ago
Marco Cellini
I have used for my last spinning rod the flex coat lite formula finish. I have applied a first hand and later around 24 hours I have applied the second. The result has been an opaque finish and not perfectly shiny. Can someone help to understand me what it has happened?
Forum: rodboard 15 years ago
Marco Cellini
92. Re: Decal making
Charlie,
You have understood well, I don't have a problem with the decal releasing from the backing paper. The surface of the decal was become fragile after wetting ( I made a full black color custom decal on clear waterslide inkjet paper, just the paper with the transparent film. I bought some sheet of it from MerrickTackle. Unfortunately I don't know its specific adhesive removal time to use
Forum: rodboard 15 years ago
Marco Cellini
93. Decal making
I'm trying to do a decal making experience follow the Dave Rogers excelent tutorial .
I overcome some initial trouble (test phases to keep confidence with this specific art), but now I'm in front of a wall.
When the decal is ready to be applied (it has a black background), I put it into a cold water and after about 60 sec it is ready ! But I note a lot " vertical scratch" on it, pract
Forum: rodboard 15 years ago
Marco Cellini
Bill, thanks a lot for you help, I'm certain that everythings will works fine !
Forum: rodboard 15 years ago
Marco Cellini
I'm going to build my first sensi-touch custom rods follow the article by Bill Stevens. Now I have the Perma Gloss to start the work but I haven't the Swifty Rod Finish epoxy suggest into the article to fix the guide on the blank before use the PG for topcoat.
Does anyone can suggest me what kind of epoxy or glue I can use instead of Swifty above to have a good job?
Thanks in advance
Forum: rodboard 16 years ago
Marco Cellini
Thanks to all,
I'll try your suggestions to find, if there exist of respective blank from G Loomis catalog.
Marco
Forum: rodboard 16 years ago
Marco Cellini
Does anyboby know the existence from G Loomis manufacture of rod to blank conversion chart ?
May you help me?
Thanks in advance
Marco
Forum: rodboard 16 years ago
Marco Cellini
My Permagloss always sets up in the bottle, what can I do to make it last longer ?
I read something about the method to put it into a can but I did't understand well how I can get it from the can to use it. Is there a faucet to install on the can? Does anyone has a photos to help me?
Thanks
Marco
Forum: rodboard 16 years ago
Marco Cellini
I'm starting to have my first experience with decals. Does anyone help me to suggest the right way to reach the maximun results ? Does anyone know some tips and tricks to have the maximum from inkjet printer and what kind of colours I can obtain ?
Thanks in advance to all
Marco
Forum: rodboard 16 years ago
Marco Cellini
After many years using color preserve for my thread, reading some article on the web a dubt attack me, is the right things use it ? Many builder don't use it ,which is your opinion about my question?
Many thanks
Marco
Forum: rodboard 16 years ago
Marco Cellini
103. Re: Epon 828
Goodmorning Mr. Bill,
I waked up this morning (Italo didn't told me nothing) and with very pleasure I read your ironic answers !
With the exception of you, all other rodbuilder readers of my post has understood my incomprehension to read the article and suggest me the right way, YOU NOT !
You wanted to humiliate me with ironic answers. Thank you a lot Mr. Bill, for your assistance and help.
Forum: rodboard 16 years ago
Marco Cellini
104. Epon 828
Does anybody help me to know where I can buy this kind of epoxy resin glue ?
I'm try to build a threadless guide wraps rod, with reference to the RodMaker magazine article.
Thanks in advance
Marco
Forum: rodboard 17 years ago
Marco Cellini
I Scott,
now my e-mail is showed to all. I wrote to Tom about the missed issue now I'm on wait to receive it.... but I need urgently to test that tecniques.
Many thanks
Marco
Forum: rodboard 17 years ago
Marco Cellini
Hi guys,
unfortunately I have missed the RodMaker volume 9 issue #6 where there was explained an article about the tecniques of Threadless, so does anybody help me sending an e-mail conteined the scannered article ?
Thanks in advance
Marco
Forum: rodboard 17 years ago
Marco Cellini
Thanks a lot Mike........I missed that information on StCroix web !
Regards
Marco
Forum: rodboard 17 years ago
Marco Cellini
Hi all ,
does anyone have a ST CROIX Rod to Blank comparison chart to change with my Lamiglas chart?
We can change it by electronic copy via e-mail !
Thanks in advance
Marco
Forum: rodboard |