I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
Rodgeeks
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast


Pages: Previous1234Next
Current Page: 3 of 4
Results 61 - 90 of 102
2 years ago
Alex Weissman
I dredged up a rod in the lake and the cork is deteriorated. It's a basspro extreme casting rod with the funny reel seat. It looks like the Fuji ACS one. What I'm asking is how to put the EVA on with the rod blank coming out of the bottom of the reel seat instead of the center. The blank measures .475 at the butt. Thanks.
Forum: rodboard
2 years ago
Alex Weissman
I had a problem logging into the website but here I am. I took Taylor's advice and bought the shooter CS722 blank. I have another shooter blank I made up spinning that I like. It's the CS721 for lighter line and river fishing. I'm waiting impatiently for it to arrive.
Forum: rodboard
2 years ago
Alex Weissman
Yesterday I lost my favorite worm rod, a Basspro 85 million modulus 6' casting 8-17 lb line. I use 8 lb fluorocarbon line and a 1/8th oz worm weight and a zoom finesse worm. I need to build another rod very similar to that one. What blank/s would you recommend and what reel seat. I built a couple of Batson Immortal blanks that I like and an MHX but they were lighter spinning rods. Thanks for
Forum: rodboard
2 years ago
Alex Weissman
A few years ago I went on a search for an ultra sensitive rod for river fishing with 6 or 8 lb line and 1/16th and 1/8 oz weights and finesse worms. I'm on my 6th rod and still looking. In the lake most of the rods are great but... I've been using ultra light, Mimima, guides, size A thread, smaller guides, less guides, better blanks etc that people on this site have steered me to. Everyone's
Forum: rodboard
2 years ago
Alex Weissman
What grade titanium wire is used for spinnerbaits? It's very stiff.
Forum: rodboard
2 years ago
Alex Weissman
You might try a push pole mfg. Mudhole, stiffy, etc. They might sell you the section you need. I noticed all the recommended ones by Roger are fiber glass. The push poles aren't tapered.
Forum: rodboard
2 years ago
Alex Weissman
Add a couple of wraps of masking tape over your guide wraps and try it.
Forum: rodboard
2 years ago
Alex Weissman
I have cut the butt from a couple of store bought rods when they interfered with casting. Usually an inch is all it took to feel comfortable and not catch on my clothes.
Forum: rodboard
2 years ago
Alex Weissman
I built a couple of really light rods on the Rainshadow IMMWS62MXF walleye blank. It's a 6'2" blank that I cut to 5 1/2' for one and left the other 6'2". I throw a 1/16 oz worm in rivers with the rods and they are very sensitive.
Forum: rodboard
2 years ago
Alex Weissman
I don't use one. Instead I put the hook in the reel seat along side the reel foot. This obviously doesn't work for all hooks and lures but all I have to please is myself.
Forum: rodboard
2 years ago
Alex Weissman
I think I have one on a Diawa inshore rod and I do like it.
Forum: rodboard
2 years ago
Alex Weissman
Does anyone know if the AERO Comfort Finish Reel Seat is heavier than a genaric reel seat? And what are their actual weights? They're both 16 mm. I'm a weak old man and like the lightest components for my rods. Thank you.
Forum: rodboard
2 years ago
Alex Weissman
My wife has 2 kitchen scales and what everyone says is right.
Forum: rodboard
2 years ago
Alex Weissman
I make my own reamers with a dowel, Using a dremel with a cut-off blade I slit, not all the way to the tip, the dowel enough to get a piece of sandpaper in it. Chuck it in your drill and ream away. I have a set from 1/8th to 3/8ths inches.
Forum: rodboard
2 years ago
Alex Weissman
Besides Mudhole, Get Bit is close by there. They have bunches of stuff also.
Forum: rodboard
2 years ago
Alex Weissman
For weighing and comparing guide weights I use my hand loading powder scale.
Forum: rodboard
2 years ago
Alex Weissman
I was at Get Bit outdoors yesterday and they have bunches of cork grips.
Forum: rodboard
2 years ago
Alex Weissman
I use the same rod I use for spinnerbaits. 6'6" fast mh. The crankbait rod is too soft IMO.
Forum: rodboard
2 years ago
Alex Weissman
I'm using the Immortal rod, I shortened, for worm fishing and it's outstanding. I think it would be too short to work the lure when in a boat. In a kayak it would be fine.
Forum: rodboard
2 years ago
Alex Weissman
I'm at my winter home in FL and re-wrapped a store bought rod with Minima guides. All my stuff is at my N GA home, Flex Coat, dryer, etc. so I coated the wraps with several coats of Hard as Nails nail polish until I go home in a couple of months. I fish with the rod.
Forum: rodboard
2 years ago
Alex Weissman
I'm not interested in the last few feet of casting distance just want a decent more sensitive rod for inshore fishing. I finished the rod and it feels much better with the lighter guides. I even caught a bass today with a twitch bait. It cast just fine. I left the reel unshimmed.
Forum: rodboard
2 years ago
Alex Weissman
You guys amaze me with your knowledge of the theory about how things work. I followed the recipe Norman gave me on guides for a previous rod I built and it catches fish almost every day. They were the smallest lightest guides, Minima, with the lightest blank, Rainforrest Immortal walleye 6' cut to 5 1/2'. The rod weighs less than 3 oz and the reel is 6 so I, as an old man, can fish comfortably
Forum: rodboard
2 years ago
Alex Weissman
I know it isn't the correct way but does anyone shim the foot on a spinning reel to point to the 1st guide? I have a rod I'm putting lighter guides on and didn't order a raised 1st guide and wondered if I was the only one that thought about it. Thanks
Forum: rodboard
3 years ago
Alex Weissman
I've been kayak fishing in the small rivers and creeks in N GA for many years and use short rods for the kind of fishing I do and the places I go. 5 1/2'. Longer rods get hung in overhanging trees and bushes.
Forum: rodboard
3 years ago
Alex Weissman
Thanks for the assurance. The first rod I'm going to do is a fast action ML I use for trout and redfish with 10 or 15 lb braid. I'll report back when I finish it in a week or two.
Forum: rodboard
3 years ago
Alex Weissman
In looking at a few, mid grade, rods that I use and they have heavy insert guides. My feeling is that the rods can be crisper and more sensitive with light weight guides, I put in an order for a bunch of Minima guides to try on a couple of these rods. Are there comments on this?
Forum: rodboard
3 years ago
Alex Weissman
I've been using a bbq spit motor for more years than I can remember. I just mount it in my vise and clamp a wood v to the bench. For a chuck I use a large crutch tip and tape the handle to fit.
Forum: rodboard
3 years ago
Alex Weissman
I used the Mudhole Split-Grip Spinning Handle Kit SGK-6. The rod weighs about 2.5 oz and the whole outfit weighs 9 oz. It's 5 1/2' long and you probably like your rods longer.
Forum: rodboard
3 years ago
Alex Weissman
I recently built a rod similar to what you are looking for I think. Mine was the lightest rod, handle and guides available with the best sensitivity. I used the minima guides and a Baston Immortal blank recommended by several people on this board. I use a reel that weighs the same as your CI4, an Okuma Helios with usually 6 lb mono or fluorocarbon. In fact I caught 3 bass with it today. I've
Forum: rodboard
3 years ago
Alex Weissman
I use a cut of wheel in a Dremel in a vice and turn the part.
Forum: rodboard
Pages: Previous1234Next
Current Page: 3 of 4

Webmaster