SPONSORS
2024 ICRBE EXPO |
Results 121 - 150 of 545
4 years ago
Don @ American Tackle
Good morning Eddie,
We are in Florida and designed our LS8/20-40 for Tarpon and have a ton of shops and anglers using them here.
Forum: rodboard 4 years ago
Don @ American Tackle
122. Re: We are moving!!!
Tom Wewerka Wrote:
-------------------------------------------------------
> So are you moving to Maryland to speed up my
> deliveries??
If it was up to me Tom, I would move there just for you ;)
Forum: rodboard 4 years ago
Don @ American Tackle
They will work great on all applications... not necessary for flipping but will not hurt anything.
I even put the 18's on my offshore jigging rods... why not?
Forum: rodboard 4 years ago
Don @ American Tackle
Good afternoon Eddie..
My go to grouper spinning rods are built on an ATX- AXVJ7050 or 7060 ... it is marked vertical jigging but a great multi-purpose blank.
Forum: rodboard 4 years ago
Don @ American Tackle
Glenn,
Like Chris mentioned above, you cannot go wrong with RingLock tips.
Not only are they 316ss but with the Ring Lock design the ceramic is protected and any chance of ring loss is minimal.
When the MicroWave guides were created we also designed the 5mm RingLock Light top to match them.
All of our distributors should have them in stock and ready to go.. here is a link to them on M
Forum: rodboard 4 years ago
Don @ American Tackle
126. Re: FREE CHICKEN!!
gary Marquardt Wrote:
-------------------------------------------------------
> Dang,
> I’ve been Jonesing for some good fried chicken.
> I am curious about those Matrix fly blanks though.
> Are they an upgrade from earlier models? Loved
> those.
Hey Gary... new look - same great blanks!
Forum: rodboard 4 years ago
Don @ American Tackle
127. Re: Shimano SLX
I would grab a small spool of the following ProWrap metallics...
9450 & 9470
Forum: rodboard 4 years ago
Don @ American Tackle
128. FREE CHICKEN!!
Not really but Now that I have your attention....
Have you tried the American Tackle ATX Vertical Jigging Blanks?
INCREDIBLY STRONG • DURABLE • UNCOMPROMISING
Contact your favorite AT distributor today to get yours on the way!!!
Check out all of the models here --->
And this amazing fishing video ----->
Forum: rodboard 4 years ago
Don @ American Tackle
Get signed up now for the upcoming AT newsletters .... For rod builders by rod builders
Forum: rodboard 4 years ago
Don @ American Tackle
American Tackle is excited to announce Chris Feagan as American Tackle Company’s newest Sales Representatives. Chris will be helping companies and individuals that cater to the nearly 50 million licensed anglers in the U.S.A. alone as well as their global partners with rod building and tackle supplies.
Chris is a passionate “Master” rod builder, and rod designer. He has traveled to over 20
Forum: rodboard 4 years ago
Don @ American Tackle
Thank you for the amazing review Donald... we thought the same thing during our many years of testing.
Forum: rodboard 4 years ago
Don @ American Tackle
It is not the same spacing.
Spacing is supplied with the system. If you need a pdf of it shoot me an email!
Forum: rodboard 4 years ago
Don @ American Tackle
For your 5wt.. check out the Matrix from American Tackle... great casting blanks that do not break you...
Forum: rodboard 4 years ago
Don @ American Tackle
You are correct sir.. There are still some floating around out there..do a web search and I think you can find some
Forum: rodboard 4 years ago
Don @ American Tackle
135. Re: need rod section
Sam, give us a call at American Tackle.. we can help you.
Forum: rodboard 4 years ago
Don @ American Tackle
Orlando, FL. - American Tackle Company’s ultramodern MW20 Finesse Set wins a best of show award being voted "Best Fishing Accessory” of ICAST 2019.
This new introduction utilizes MicroWave Line Control Technology to capture and tame fishing line while casting a fishing rod to improve both the fishing rod and angler’s performance. It is the second ICAST award for a MicroWave Line Con
Forum: rodboard 4 years ago
Don @ American Tackle
Bushido... some of the toughest and best feeling blanks on the market today... and will not break the bank
Forum: rodboard 4 years ago
Don @ American Tackle
They were discontinued a while back... I know there are a few retailers that may have some left... great blanks.
The matrix fly blanks are amazing blanks... probably the easiest casting fly blank I have ever used
Forum: rodboard 4 years ago
Don @ American Tackle
139. Re: Inshore blanks
Take a good look at the Bushido CB and LS series... you will love them
Forum: rodboard 4 years ago
Don @ American Tackle
The MW12 is designed for the 3-6 wt fly... the MW18 on the 6-10 wt.
So far real world testing is super positive! ... they help the novice casters and has no ill effect on professional casters.
Looks great and works great.
Great thing about them is you can retrofit old fly rods... use standard fly rod guide spacing.
Forum: rodboard 4 years ago
Don @ American Tackle
Brian Babcock Wrote:
-------------------------------------------------------
> Let me know if you need more. I have some in both
> black and silver hoods that I could spare (but
> only if more are on the horizon - Don??)
> Brian
Yes, they are coming
Forum: rodboard 4 years ago
Don @ American Tackle
We are working as fast as possible to get them back in stock... last I heard Schneiders still had some in stock
Forum: rodboard 4 years ago
Don @ American Tackle
143. Re: Guide advice
Check out the other MicroWave sets... the duralite set is still very affordable.
Forum: rodboard 4 years ago
Don @ American Tackle
Hey Seth,
This is something I have not heard of before... I would love to learn more if you have not yet figured it out, give me a call
Forum: rodboard 4 years ago
Don @ American Tackle
set the stripper guide at 18-20" from the reel and static test the rest...
Shoot me an email if you need further help
Forum: rodboard 4 years ago
Don @ American Tackle
Glad you had a great turn out... awesome to see the group going strong..
On behalf of AT, we are glad to help.
Forum: rodboard 5 years ago
Don @ American Tackle
147. <>< NOW SHIPPING ><>
Get them now from Anglers WorkShop and Mudhole
Forum: rodboard 5 years ago
Don @ American Tackle
Bushido is the most amazing DS blank I have ever used
Forum: rodboard 5 years ago
Don @ American Tackle
These are light weight graphite.. not sure of exact weights...
Thomas Kaufmann Wrote:
-------------------------------------------------------
> How do the casting versions compare weight wise to
> an ecs?
Forum: rodboard |