SPONSORS
2024 ICRBE EXPO |
Results 1141 - 1170 of 1255
11 years ago
Bill Sidney
1141. SIZE OF REEL SEATS
Help I know a little bit aboit fly rods an even less than spinning what real seat do I use a spinning rod ? the rod will be 7 FT , 2 pice , 8 to 14 lb what size real seat do I use 16 , 17
, or 18 any help I am doing this over the web so what ever size I get will be it so help
Forum: rodboard 11 years ago
Bill Sidney
1142. Re: Fuji BNMVAG guides
have you talked to MUDHOLE they do know the problrms with postage an do work with you to get it down to a point they don't loose money an still don't cost you a group of money , do call them they do work with you
my 2CTS just a beginner at rod building
SID,
Forum: rodboard 11 years ago
Bill Sidney
1143. Re: Glue for cork rings?
the answer to your question can't be ansered here as there is more than 1 person , every 1 is a little different , most 2 part will work , as well as the urethine 's ,TB lll well also , as I have used a little bit of all, [ not at one time ] some will dry a little harder but all the comments above will work just buy small amounts an try them out an see what you like ,
my 2 CTS
Forum: rodboard 11 years ago
Bill Sidney
new at bulding rods , but they all work , I have used them all
Forum: rodboard 11 years ago
Bill Sidney
1145. Re: scales vs syringe
the syringe is the way to go for the mesurement some times you have to heat it up a little as when it is cold it will not flow very well
,l take your time an try to keep the bubbles out it will help in the end
Forum: rodboard 11 years ago
Bill Sidney
1146. Re: Broken Rod
you can do lots of things, but why not just buld a new rod , or are you in love with that handle an have to have that hande that is well used an crudey with fish slim an scales ?????????
Forum: rodboard 11 years ago
Bill Sidney
1147. Texas rodbulding AUSTIN
is there any gathering planed for Austin Texas in Nov. 2012 will be down there foe a couple of weeks any info out there Bill
Forum: rodboard 11 years ago
Bill Sidney
if you follow Phil's suggestion on how to get the correct guides don't forget the size of the tip top then use Tom"s suggestion on the guidrs don't play with differant sizes go 16, 12 , then on the same size from there on an it should be the size you need for the line an knot to pass thrue it , this will save you some lost fish , snake brand snake guides have a curve to the foot on th
Forum: rodboard 11 years ago
Bill Sidney
1149. Re: hello from panama
glad to have you on board an yes you will get a lot out of the forum , there are a lot of people out here , that will give you lots of good information on how to build
RODS OF ALL TYPES
Forum: rodboard 11 years ago
Bill Sidney
1150. Re: cork reamer
Contact glue is the best forget the epoxy
Forum: rodboard 11 years ago
Bill Sidney
1151. Re: Thread
don't know about the postage cost but there customer service is one of the best in the busness if not the best out there, if you have a problem they will bend over back ward to fix it
I don't think you will here a bad word about them
Forum: rodboard 11 years ago
Bill Sidney
1152. Re: getting to the expo
thanks for the info that is what I needed BILL
Forum: rodboard 11 years ago
Bill Sidney
1153. Re: getting to the expo
I under stand how to use a GPS what I would like to have what major AIR PORT do I fly into distance from the EXPO
BILL
Forum: rodboard 11 years ago
Bill Sidney
1154. getting to the expo
looking at going to the EXPO as I will be flying in , what would be the best way to get to Winston Salem I will have a car ??????????? just started looking any help???????
Forum: rodboard 11 years ago
Bill Sidney
1155. Re: Supplier referral
I have had some dealings with Mudhole an it has all turned out postive all the time with them , they will bend over backward to help even the small orders like mine
they have one of the best customer service sections around BILL
Forum: rodboard 11 years ago
Bill Sidney
thanks for all the input will have to think about all the info I got ,
thanks again
BILL
Forum: rodboard 11 years ago
Bill Sidney
1157. Mistake take out thanks
sorry mistake ????????????????????/
Forum: rodboard 11 years ago
Bill Sidney
doing my frist boat rod , when doing a double wrap on the guides , [ under wrap ] do you put flex coat on the frist wrap befor putting the second wrap on ????????????????
or do you just do both wraps on frist line them up , them do the flex coat ????????????? any help I could not find any thing about this on the forum ,
Forum: rodboard 11 years ago
Bill Sidney
do let us know how it came out as a lot of people follow this type of problems an would like to know how it comes out
Forum: rodboard 11 years ago
Bill Sidney
1160. Re: Newbie-Questions
use """""""""""""""" search """""""""""""""" on the line above your listing
Forum: rodboard 11 years ago
Bill Sidney
1161. Re: fly reels
as you will see there is a lot of idea's out there,, an they will all do the job for you , I think you want to know is about price as a 5 WT you don't need to have a drag that will hold a truck so if you look at the OKuma reels in the high end of there line , you will get a very good reel for the money , an a lot of big box stores handle some part of there line , even the low end of the
Forum: rodboard 11 years ago
Bill Sidney
when you but on the flex coat or other epoxy take a drop an put it on a coffie can lid ,, that is what you play with it , thay way you can keep track of the hardness an not mess up your project / ROD it is great for me
there is always some that you throw away from that MIX
Forum: rodboard 11 years ago
Bill Sidney
snake Brand is one of best out there, the foot is curved to match the rod , on the small part of the rod it is a real help when winding the guides on ,
but not cheep compaired to the reg snake guides
Forum: rodboard 11 years ago
Bill Sidney
the reamer filte will do the job the with less mistakes, won't jump out a do the side you want to save
Forum: rodboard 11 years ago
Bill Sidney
1165. Re: Reel Seat Removal.
the two cuts with the dremial tool is the way to use as it is a lot less mess tham doing the water an may bee it will come off
Forum: rodboard 11 years ago
Bill Sidney
I would take the rear handle off an turn the ring around an put a new handle on you ,will feel better , an no one will ever Know what is going on
Forum: rodboard 11 years ago
Bill Sidney
at 10 Deg. C your flex coat will be very stiff you will haveto heat the flex up some so it will flow [ will crystalise in the bottle ] hot water or micro wave will do it , you can build a TEMP bow to go over your drying table out of card board [ cheep] can be folded down for later use , an put a light in side for heat works fine for me , but I only do a rod every couple of MTH. [ small timer
Forum: rodboard 11 years ago
Bill Sidney
don't know about some of the questions but the glue will go up an down to expand it don;t have suffent force to break the shaft on rods you build
splin on heavy sections of all rods it is tuff to find I use two pegs with the section suported on each end with weight in the center an turn by hand , messure the drop with a good messureing stick most drop is splin on top [ I use a steel ruller in
Forum: rodboard 11 years ago
Bill Sidney
1169. Re: Epoxy Ramps
I am not sure but rubber flexes an don't how long it will hold the wrap an Flex coat on top with all the effort on the build I would stick on a more stable under build than rubber but it might work so try it out an let us know , but still I would not use it just because it can move some
Forum: rodboard 11 years ago
Bill Sidney
1170. Re: Deflated
all the shippers try to get it correct the frist time " BUT " they ali do make mistakes , no matter what one you use, FEDX an UPS are faster to settle up with a claim tham USPS , they are very slow , that is why most of the large supplyers don't use them when shipping a unit that cost more than $ 50.00
Forum: rodboard |