SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 857
11 years ago
lorenzo tellez
6 coats of tru oil, wet sanded next to last with 3000 then 5000 water proof sand paper, then put a coat of tru oil on the last wiped off excess, and let dry, rubbed with 0000 steel wool inbetween coats.
Forum: rodboard 11 years ago
lorenzo tellez
2. PTDC0040
Catfish caught with a MB873 MHX 7'3" Rod
Forum: rodboard 12 years ago
lorenzo tellez
Just wanting to get you a pic that you can take a better look at.
Forum: rodboard 12 years ago
lorenzo tellez
decided to epoxy this, since it was a 2wt fly rod blank made into a ultra lite, the smooth grip didn't bother me since most of my hand was inder the reel seat.
Forum: rodboard 12 years ago
lorenzo tellez
best pic i have, need to get better camera lol! I misseda step on teh wrap but ended up finishing it, here it is!
Forum: rodboard 12 years ago
lorenzo tellez
took a trim from the top of a reelseat form a St Croix Extreme rod that I had to put new guides and reel seat on and put a small titanium colored winding check.its on an Rainforest II 2wt fly rod blank that i am building into a ultralite spinning rod.
Forum: rodboard 12 years ago
lorenzo tellez
just added a titanium colored winding check in front of the reel seat titanium check that goes over the front of the reel seat.
Forum: rodboard 12 years ago
lorenzo tellez
8. Tiger wrap
mMaderia blue, and rose metallic, that went with the southwest blanket that i had finished, my camera won't get a good close up of the whole rod, so this and the other is what i took.
Forum: rodboard 12 years ago
lorenzo tellez
9. blanket
This is the Southwest blanket I had finished last month,blue with aqua, and rose mett. all maderia thread, except for the rose mett. it just got cp'ed.
Forum: rodboard 12 years ago
lorenzo tellez
10. in- in-,
my first in- in-, looks more like teh flag colors but if you look close i tried to fade teh colors, this is teh one i wrote on the Rod Building topic about teh bubble problem, it turned out better then I expected thanks to all teh help from teh Rod Builders who gave me an inspiration to keep on this one when iwas about to give up and dump it lol!
Forum: rodboard 13 years ago
lorenzo tellez
This one is my first tiger wrap, Like I said before, I still have this tiny bubble thing, that I always get when it dries.
Forum: rodboard 13 years ago
lorenzo tellez
My second tiger wrap.I still have problems with that tiny bubbles, that i don't see until later.if antone has suggestions i will be more then happy to read them. Thank you.
Forum: rodboard 12 years ago
lorenzo tellez
Me and my buddie built our first rod together and here is his first bass on his first build, he caught this one a week after I caught my first bass on my first build.
Forum: rodboard 2 years ago
lorenzo tellez
sorry about the my ? Coming out that many times. I did not know it came out 3 times. Till I looked at it. I meant to say " to recoat..."
Forum: rodboard 2 years ago
lorenzo tellez
To report cork with tru oil, should I sand first then recoat?
Forum: rodboard 2 years ago
lorenzo tellez
To report cork with tru oil, should I sand first then recoat?
Forum: rodboard 2 years ago
lorenzo tellez
To report cork with tru oil, should I sand first then recoat?
Forum: rodboard 5 years ago
lorenzo tellez
I tried to post on the buy/ sell, but when i submit a message appears saying the recaptcha wasn't entered correctly, i have tried several times, does anyone know what could be the problem on how i could list my sale on these qauntum exo reels i have, thank you .
Forum: rodboard 5 years ago
lorenzo tellez
Hello, David, I lost your email address, so I hope you are gonna read this, I just got your check and I deposited it, so todays is Nov 2,Fri so hopefully it will clear by Monday so I can send it off, but the check looks good so I might just send it off monday anyways hope your rod comes out alright, sounds like a really good crank rod, I do a lot of cranking myself, I use a 7ft 6inch med heavy w
Forum: rodboard 5 years ago
lorenzo tellez
24. Hand wrapper
The hand wrapper is still for sale, I had an inquiry, but told him it was packed and ready to ship, what I meant was to whom ever buys it, it's still for sale.
Forum: rodboard 6 years ago
lorenzo tellez
Thanks for the input, I will try it first on a scrap rod.
Forum: rodboard 6 years ago
lorenzo tellez
Thanks for the input, I will try it first on a scrap rod.
Forum: rodboard 6 years ago
lorenzo tellez
Thanks for the input, I will try it first on a scrap rod.
Forum: rodboard 6 years ago
lorenzo tellez
29. Color protecter
Will 6 year old color protector still be good to use.
Forum: rodboard 6 years ago
lorenzo tellez
By the way, how about the butt guide, how should the line look going through the butt guide on the load test? Should it just touch the top of the butt guide ot lower?
Forum: rodboard |