SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 63
1 year ago
Walt Stock
Mudhole does have in stock a yellow CRB IS761 7'6" Yellow rod you could cut down.
Forum: rodboard 2 years ago
Walt Stock
Mychael, I can tell you what use if that will help. I use a 12 and 10 double foot, an 8 single foot and the rest 6 single foot and 6 tip top. I find that sooner or later, the customer will use it for frogging or flipping, etc. and may use a knot from main line to leader - therefore the 6's help it pass better. That being said, I've also built rod that heavy and long with 1 #8 double foot fo
Forum: rodboard 2 years ago
Walt Stock
I am in the middle of 2 transactions now and would appreciate Alex's email as well. Thanks
Forum: rodboard 2 years ago
Walt Stock
I've had all the same concerns - You will notice if you call the numbers on the RODgeeks site, you are actually calling St. Croix in MN. I asked for a single point contact and here is the response..."My name is Debbie and my direct phone number is 1-800-826-7042, ext. 122 I am the only one who does customer service for Rod Geeks. Thanks."
Forum: rodboard 3 years ago
Walt Stock
I use many RodGeek blanks for builds - I consider them every bit as good as the SC as even though they are mfg in Mexico (Still North America) they are built with SC recipes. The price point is a winner for my Bass market and have never had a problem. Don't be afraid of these!
Forum: rodboard 8 years ago
Walt Stock
These are proprietary to Duckett so you will need to call them. They were very good in helping me this past summer when I needed tips and guides.
Well, found my notes and they may be Artus 7mm on the guides, but I do remember receiving the tips in the mail direct. Try email: sean@duckettfishing.c
Forum: rodboard 8 years ago
Walt Stock
Just ordered a rod dryer set and already have my shipping confirmation. Y'all are too good. Thanks
Forum: rodboard 8 years ago
Walt Stock
I'm in the process of changing all my spinning rods to the Microwave system; they're that good. I find them sturdy and have caught Largemouth, smallmouth, stripers and hybrid up to 25#. The stripper guide stands tall so caution must be taken about stepping on them.
Forum: rodboard 10 years ago
Walt Stock
Joel,
I'm in Smithville, TN (Center Hill Lake) so if you need some help, feel free to email me.
Cheers
Forum: rodboard 11 years ago
Walt Stock
Building an XL875 for a customer in NJ. A Swimbait rod for lures up to 2 oz. Haven't fished with it so not exactly sure which way you men "use."
Cheers
Forum: rodboard 11 years ago
Walt Stock
Just received the subject blank and notice several quality issues. To whom shall I speak at Phenix?
Thanks
Walt
Forum: rodboard 12 years ago
Walt Stock
I really appreciate the post - awesome what some folks can do and enjoyed the video very much.
Cheers
Forum: rodboard 12 years ago
Walt Stock
I used the pac bay orange with a silver underwrap for my sons UT rod. Got a decal from M'hole and it turned out great.
Forum: rodboard 12 years ago
Walt Stock
I used the pac bay orange with a silver underwrap for my sons UT rod. Got a decal from M'hole and it turned out great.
Forum: rodboard 12 years ago
Walt Stock
19. Can't wait!
Leaving TN Monday for appointments throughout the NC area, ending up in High Point on Friday! Looking forward to another great reception and show!
See ya there!
Cheers!
Forum: rodboard 12 years ago
Walt Stock
20. Congratulations
Congrats on celebrating 15-years!
Appreciate all you do!
Cheers
Forum: rodboard 12 years ago
Walt Stock
If right handed, but in on the lift side of the blank - opposite if Left handed. Line doesn't catch it and it's handy.
Been doing it that way for years with no problems. Second choice is down.
Cheers
Forum: rodboard 12 years ago
Walt Stock
Don,
I'm not in Michigan but I grew up in Lapeer - small world. Hope you can put something together.
Cheers!
Forum: rodboard 12 years ago
Walt Stock
23. Re: Seeker Rods
Hoping to make it again this year - let me know when you're back in Guitar Town!
Cheers Bud
Forum: rodboard 12 years ago
Walt Stock
Is it just me or an optical illusion - looks like the reel is on backwards?
Either way, nice work!
Forum: rodboard 12 years ago
Walt Stock
It's not uncommon for manufactures to ship their 240V items without an AC Plug as so many countries have different style receptacles.
Hope things get worked out for you.
Cheers
Forum: rodboard 13 years ago
Walt Stock
The U-40 brand worked for me - used the same thread many times with good results. Just finished some wraps tonight actually.
Hope it turns out better over time.
Cheers
Forum: rodboard 13 years ago
Walt Stock
Just finished a 706 in Brown with Green and Gold Trims and used black reel seat trim - no fore grip, split grip, black EVA
Turned out great.
Cheers
Forum: rodboard 13 years ago
Walt Stock
Many bass fisherman I know still use pistol grip rods for close cover spinner bait fishing. I agree with the 5 to 6 foot rod length, Medium with fast tip.
Good luck
Forum: rodboard 13 years ago
Walt Stock
Doc
Sending some now. 4-kids, their spouses, 12-G'kids = let me know if you need more! ;-)
Cheers
Forum: rodboard |