SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 36
5 years ago
Brett Hinson
Phil my shoulders will not handle it all day, the rod is for a friend thats addicted to swim baits. Unbelievable what he pays for some of his lures. He wants the rod around 8' and prefers a one piece rod. Bigger baits bigger fish at least thats what he says and he has caught some hawgs, several over 12lb.
Forum: rodboard 5 years ago
Brett Hinson
I just havnt found one that will handle 8-12 oz lures that is not heavy . Most are too heavy to be casting all day.
Forum: rodboard 5 years ago
Brett Hinson
I am trying to find a blank for heavier swim baits 8-12 oz , casting, braid 50-80 lb. I have not been able to find anything I like for casting baits over 6oz.
Forum: rodboard 6 years ago
Brett Hinson
You should trust your Rod Builder, they have the knowledge to build what you want.
Forum: rodboard 8 years ago
Brett Hinson
I had a problem with two of the Aero seats not holding the reel tight. I called AT , was told they had a problem with a run of the seats. They replaced the defective ones, I have had no more problems with them. This happened last year.
Thank You American Tackle for great customer service.
Forum: rodboard 8 years ago
Brett Hinson
I am also in New Bern on Glenburnie. You will love the area.
Forum: rodboard 9 years ago
Brett Hinson
Don what about a size in between the two ? 20 is too small and 50 is too big?
Forum: rodboard 10 years ago
Brett Hinson
Call Alex at Hydra. He can help you. He works with a company in Arkansas.
Forum: rodboard 10 years ago
Brett Hinson
10. Blank help
I need a blank for throwing popping corks to Old Drum and Tarpon in Pamlico Sound. In the 8'-9' ,spinning 50lb braid , 10000 Shamino. Looking for something light in weight. Looked at several blanks that are moderate action but I would like something faster. Any suggestions?
Thank You
Forum: rodboard 10 years ago
Brett Hinson
11. Re: Rod for Tuna
I am looking at the Phenix TPX800M. I have built lots of Bass and inshore rods but nothing this heavy . Not sure what guides and seat to use.I could use some help pointing me in the right direction.
Thanks for the help.
Forum: rodboard 10 years ago
Brett Hinson
12. Rod for Tuna
I need a blank for tossing top water to Yellow Fin tuna in Costa Rica. Any suggestions on blanks guides and set up? It will be spinning.
I am building it for a gift for a friend. I think he said he would be using a 10000 or 12000 Shimano reel.
Thank You..
Forum: rodboard 11 years ago
Brett Hinson
I built a Batson XP904 with carbon fiber grips that floats with the new Abu carbon fiber reel. Total weight of rod with reel is 9 oz.
I have looked at overboard rods. They look bulky and heavy.
Forum: rodboard 11 years ago
Brett Hinson
I use a Batson XP 843. Best Trout rod I have I have built and very lite. (3.27 oz) It will handle a 20" Redfish also. The 843 makes a nice Drop Shot Rod also.
Forum: rodboard 11 years ago
Brett Hinson
15. Re: Digital Camo
Thanks Spencer . That looks like it will work.
Forum: rodboard 11 years ago
Brett Hinson
16. Re: Digital Camo
Yes they have some camo patterns but not the Blue Digital pattern. I have called all the suppliers I know with no luck.
I found some EVA in Blue Water camo ,waiting to see if that will work.
Forum: rodboard 11 years ago
Brett Hinson
17. Digital Camo
I am looking for something in the new Navy Blue Digital camo pattern to add to a rod. Any suggestions? I can find other colors but no blue.
Forum: rodboard 11 years ago
Brett Hinson
How do you make carbon fiber tubing? What do you use to get the size you want? What type of epoxy do you use?
Forum: rodboard 11 years ago
Brett Hinson
I had a great time,learned a lot. Thanks Tom and Morris.
Now I just need to pratice.
Forum: rodboard 12 years ago
Brett Hinson
20. Re: alabama rod
What size guides and spacing do you use on your A Rig Rod Steve?
Forum: rodboard 12 years ago
Brett Hinson
21. Re: Blank Help
I decided to extend a 8' blank. The customer dosnt want to pay that much.
I would like to learn more about using a fly rod blank for a spinning rod. I have never built a fly rod.
How do you get line size and lure weights ? What is weight? Like 10 weight.
Thanks for all the help.
Forum: rodboard 12 years ago
Brett Hinson
22. Re: Blank Help
The rod is for a customer. I tried to talk him into a shorter rod. Insisted on a one pc. ,9' rod. Will leave it at the coast.
Want use braid and dosnt want micro guides. He saw someone with a rod like this and wanted one. Said it was custom.
Forum: rodboard 12 years ago
Brett Hinson
23. Blank Help
I am looking for a blank for Speckled Trout . It needs to be 9' one pc. , spinning.. Will be throwing grubs and Mirror lures from the surf. It needs to be lite.
Line 6 to 12, using a Mitchel 300.
Forum: rodboard 13 years ago
Brett Hinson
I will be there. What time?
Whats the address?
Thanks Chuck.
Forum: rodboard 13 years ago
Brett Hinson
I have a customer that wants a 5'6" to 6' spinning rod.. He wants it 4-8# ,1/16 to 5/16 oz. Must be 2 pc.
I havent been able to find one. Any suggestions?
Forum: rodboard |