SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 279
2 months ago
Tony Politi
Roger Wilson, thank you for the cutting board idea, I think I have a few old ones in the garage that I saved for use on the boat. I had planned on making something out of wood if I couldn't find the actual part.
Thanks again!!
Forum: rodboard 2 months ago
Tony Politi
roger wilson Wrote:
-------------------------------------------------------
> Tony,
> Please post a picture of what you need.
>
> Most times a picture saves many words of
> explanation.
If I could figure out how to attach a picture to this I would. Let me see if I can upload one to the photo tab.
Forum: rodboard 3 months ago
Tony Politi
Thanks Spencer, I think I'll try to rig something. Was hoping there were replacement parts somewhere. Oh well.
Forum: rodboard 3 months ago
Tony Politi
Does anyone still sell parts for the Amtak/Pac Bay Power Wrapper? I am looking for the bottom piece of the rod support ( The piece that clamps it to the track)
Forum: rodboard 10 months ago
Tony Politi
Mike Ballard Wrote:
-------------------------------------------------------
> I would not expect the same level of attention
> that this site had when Tom owned it. Those days
> are over. Move on. On the other hand, the new
> owner is making some changes and maybe this is
> causing the issue. But even still all you have to
> do most times is just reload the page and it wi
Forum: rodboard 10 months ago
Tony Politi
chris c nash Wrote:
-------------------------------------------------------
> Torzite is extremely slippery , more so than any
> other guide ring material on the market right now
> imo . I use Torzite on my surf rod builds and they
> perform incredibly well , most will not be able to
> tell a difference between ring materials . CTS
> did a big write up about Torzite and
Forum: rodboard 14 years ago
Tony Politi
9. Guide ID?
Here's one that show the actual color of the guide
Forum: rodboard 14 years ago
Tony Politi
10. guide ID?????
The color is off, but it is a good clear photo.
Forum: rodboard 15 years ago
Tony Politi
11. 2009 ICRBE
It really doesn't a need a description does it?
Forum: rodboard 17 years ago
Tony Politi
Used Amtak "X tube" over cork tape on fore grip. Quick grip over 2 layers of cork tape on butt grip.
Forum: rodboard 17 years ago
Tony Politi
Here is my first "moderately" complex butwrap. Didn't quite make it a closed wrap. Didn't follow a set pattern, atarted off making a chevron, and made modifications from there.
Forum: rodboard 2 years ago
Tony Politi
Porta rod makes a nice bed mounted holder.
Then there's this but it's pricey
Forum: rodboard 3 years ago
Tony Politi
17. Backlash Tools
Hey all, I assume Backlash Tools aren't around anymore, I did a google search. I have one of their tip top supports and I just noticed that the white plastic piece that holds the rod tip is broken off. I thought I'd see if anyone has one that they might be willing to part with. If not I will try to rig something up, but it's always good to ask.
thanks, Tony
Forum: rodboard 4 years ago
Tony Politi
Last 11'6" rod I built I believe my stripper guide was closer to 32" from the front of the reel seat, but that's with a 2.75" spool diameter. Tape some guides on and static deflect it and test cast it
Forum: rodboard 4 years ago
Tony Politi
It's not a bag, but in my travel tube I purchased a couple of yards of fleece blanket material. I take the rods apart and wrap each piece in the fleece until all pieces are covered. Since my travel tube is fairly large, the fleece is longer than the tube. I fold over the ends and put a wrap of double sided velcro on both ends and one in the middle. I've also used rubber bands as well. Maybe i
Forum: rodboard 7 years ago
Tony Politi
Michael, here are 2 good articles from the library.
Guide spacing and placement. -
Static guide placement -
What line are you planning to use on the Shimano Ultegra ci4 xib 5500? Braid or Mono? If you are using braid you can start with a 30 or possibly a 25.
Forum: rodboard 7 years ago
Tony Politi
Thanks Bill. Tried searching earlier, but it never seems to work well on my phone.
Forum: rodboard 7 years ago
Tony Politi
Does anyone remember what issue of Rodmaker that has the article on making the reverse pilot bits?
Forum: rodboard 8 years ago
Tony Politi
Go to the VW website, there is a tutorial on installing it on Windows 7. It worked for me.
Forum: rodboard 8 years ago
Tony Politi
27. Re: New Issue
Not sure a new wrapper will fit in my mailbox, lol
Forum: rodboard 9 years ago
Tony Politi
Tom, are the stickers still available if we send a Pre-paid 5x7 envelope?
Forum: rodboard |