SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 9 of 9
1 year ago
Mike Colley
Thanks everyone for the suggestions, I take it about everybody likes an XF action, I will take a look at all the ones mentioned
Forum: rodboard 1 year ago
Mike Colley
Just learning the jerkbait, and been using a mojo bass 6' 8" med, fast action.
Wanting to build a dedicated jerk bait rod, what action dose everyone use for hard jerkbaits.
Any blank suggestions would be appreciated. thanks
Forum: rodboard 1 year ago
Mike Colley
I finally decided on the Judge blank 7" MH and Just got the parts in to put it together,
If it fishes as good as it looks, I'll be happy
Forum: rodboard 1 year ago
Mike Colley
Thanks for the link, I thought there might be some standard to go by
Forum: rodboard 1 year ago
Mike Colley
Michael Danek Wrote:
-------------------------------------------------------
> Many builders believe that the height of the first
> guide on a BC rod is more important than the size.
> I use the high Fuji RV6 on all mine. Many use a
> double foot size 10 to get the height.
are you wanting the line to go thru the center of the first guide
Forum: rodboard 1 year ago
Mike Colley
Just completed my first build of a Rx 10 7' 2" mh and I caught my first fish on it yesterday although it was a little on the short side,
I am getting ready to build a crank bait rod and my question is, I used a fuji Kw 7 as the first guide and it seems to work ok pitching and making short casts with a 3/8 oz jig and trailer
on a rod you are going to cast like a cranking rod is there a stan
Forum: rodboard 1 year ago
Mike Colley
Thanks for the suggestions, everyone, I will certainly take a look at them
Forum: rodboard 1 year ago
Mike Colley
I have been reading on the ccs and haven't gotten an understanding of what these numbers mean to a blank. thanks for your advice
Forum: rodboard 1 year ago
Mike Colley
I have just started into the adventure of rod building and can already tell it might become addicting.
I am in the process of my first build of a light plastics and jig rod on a rain shadow Rx10 ETEC72M-SS and am wanting to build a cranking rod.
Trying to understand the rating numbers for different blanks, been reading about the ccs but don't really have a handle on it.
So I thought I would as
Forum: rodboard
Current Page: 1 of 1
|