SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 14 of 14
12 months ago
Dan Metcalf
Ronald,
All the above is excellent feedback. It's true that the technique of using the can eliminates air exposure. A vacuum is created as Perma Gloss is dispensed.
Please note that as of several years ago we, at Trondak/U-40, began using a better cap for packaging Perma Gloss and providing an additional backup cap with each bottle. The old caps had a poly-cone liner. Unfortunately it w
Forum: rodboard 5 years ago
Dan Metcalf
We are very pleased to announce the launch of our new website. After months of work the NEW U-40 WEBSITE is ready to serve your needs better than ever before!
Links to “How-To” videos for basic to advanced custom rod building.
Read about our founder, Ralph O’Quinn, and watch his video
See the full U-40 line of products!
WWW.U-40.COM
Forum: rodboard 6 years ago
Dan Metcalf
Thank-you custom rod building community for your kind and thoughtful comments regarding Ralph O'Quinn, my father-in-law. He loved you guys, loved being with you, loved Tom Kirkman, loved coming to ICRBE. It was five years ago the hospital sent him home to die within two weeks, "maximum", from a double dissected torn aorta. A couple of months later when it became clear he wasn't goin
Forum: rodboard 8 years ago
Dan Metcalf
Hi MIchael,
Two year old unopened Rod Bond is not a problem. It has a very long shelf life. You could almost say it has an unlimited shelf life. If, however, the "Resin" (white) part becomes difficult to stir then it has most likely become crystallized. The remedy for this is easy. Take the lid off and microwave it for ten second increments until it is relatively hot (the jar wi
Forum: rodboard 10 years ago
Dan Metcalf
Ten months ago we, Trondak, Inc. (maker of U-40 products) finally solved the problem of Perma Gloss pre-maturely setting up in the bottle. After a change of supplier of the main raw material two years ago we began to notice that Perma Gloss was setting up in the bottle even sooner than it had been before, though the material was virtually the same. Before the change, however, we were not seeing
Forum: rodboard 11 years ago
Dan Metcalf
Hi Gerald,
I use exclusively Trondak's Dura Gloss LS Supreme, but then again, being one of the owners, I am a bit biased.
Best Wishes!
Forum: rodboard 11 years ago
Dan Metcalf
Hi Col,
Our company, Trondak, makes Perma Gloss. Acetone works great as a brush cleaner for Perma Gloss.
Best Regards,
Dan Metcalf
dmetcalf@aquaseal.com
Trondak, Inc.
www.U-40.com
Forum: rodboard 15 years ago
Dan Metcalf
Hi Ray,
Sorry to take so long to respond. We make the Perma Gloss. Hardening in the bottle is the result of air moisture acting as a catalyst. Someone has probably already explained this to you. The easiest remedy is to pour the amount you need for the rod you are building into a separate container and work out of that. As soon as you pour some out wipe off the bottle lip and put the cap
Forum: rodboard 15 years ago
Dan Metcalf
Bill,
Thanks for the comments, the testing and your order! It means so much to get confirmation from great rod builders that the product is serving an important need.
Have a great weekend!
Dan Metcalf
Trondak, Inc.
Forum: rodboard 15 years ago
Dan Metcalf
Karry,
Thanks for the comments regarding Quik-Bond! It was great to hear that it was doing a good job for you. Perhaps it will serve the needs of custom rod builders as much as Rod Bond.
This year I am just beginning to learn to catch bass on a fly since the trout don't bite. Having fun.
Say hi to all,
Dan Metcalf
Trondak, Inc.
Forum: rodboard 15 years ago
Dan Metcalf
Quik-Bond has all the same features and benefits you have come to know and love about Rod Bond, such as:
„« Easy to mix, very forgiving.
„« Stays where you put it without dripping and running.
„« Bonds almost any material to any material, i.e. cork, metal, wood, graphite, fiberglass, eva, etc.
„« Can be used for bonding cork rings, cork handles, eva handles, reel seats, butt c
Forum: rodboard 15 years ago
Dan Metcalf
Today we are proud to introduce our new fast curing version of Rod Bond.
The label name is: ¡§Quik-Bond¡¨.
Quik-Bond has all the same features and benefits you have come to know and love about Rod Bond, such as:
„« Easy to mix, very forgiving.
„« Stays where you put it without dripping and running.
„« Bonds almost any material to any material, i.e. cork, metal, wood, g
Forum: rodboard 18 years ago
Dan Metcalf
I will have a couple of cans for demo there. So come on by and see how easy it is to extend the self life of Permagloss. We could have a drawing for one of the demo cans.
See you at the Trondak booth.
Joe Kassuba
Forum: rodboard 18 years ago
Dan Metcalf
To all attendees, we formally invite you to come by our U-40 Rod Building Products booth. Ralph O'Quinn, Joe Kassuba and Dan Metcalf will be there to demonstrate application of LS Supreme, LS Supreme High Build, Rod Bond, Perma Gloss and other U-40 products. We will be there to answer your questions and have some fun.
Ralph O'Quinn will be doing two of the show's seminars, "Rod Repair&q
Forum: rodboard
Current Page: 1 of 1
|