SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 12 of 12
1 year ago
Jeffrey Mullendore
Good Afternoon all,
First I wanted to thank each of you for your help with a rod and reel refurbish project I did this past year. Many of you donated some old reels and gave me a lot of advice.... thank you...!!! By doing this project I was able to donate $1,125.00 (from the proceeds) to the Indiana Elks Association Veterans Project (Parade of Nickels) at the end of my year as the Associati
Forum: rodboard 3 years ago
Jeffrey Mullendore
Looking for some direction.
I am in the process of fixing an old rod for a friend of mine.
He uses this pole to cast heavier baits.
A couple of the line guides have broken and need to be replaced.
With this in mind I want to either get some original guides or find something that is really close to original.
Zebco Rhino
Trigger Rod Model ZRC66MH
Line 10lb-25lb
Double footed -
Forum: rodboard 3 years ago
Jeffrey Mullendore
My question is..................
I was amazed at the looks and texture of the burl (red) corks when I applied the cork seal.
Then it dried.... bummer..... lost all that texture and looks.
Michael mentions using wrap seal in a previous reply.
I have used Polyurethane on some store bought rods in the past but it made them slippery.
""What is the best way to finish burl cor
Forum: rodboard 3 years ago
Jeffrey Mullendore
Roger - Jon - Roger,
Thank you. Those are some great sites.
Thomas and Norman,
Getting ready to send you an email.
Mully
Forum: rodboard 3 years ago
Jeffrey Mullendore
5. Reel Parts
Good morning all,
Looking for some reel parts.
I have a Shakespeare Wondercast Model 1778 and a Zebco 202.
Looking for recommendations on any online parts sites or the name of anyone you may know that may have parts for old reels.
These reels are from a couple of rod projects I am working on.
I have been going to garage sales, church bazaar's, etc and purchasing old rods and reels.
O
Forum: rodboard 3 years ago
Jeffrey Mullendore
All,
Thank you.
Was able to find line guides that are "almost" exact copies.
Finished it up last night and it really looks great.
(now on to the next one)
Mully
Forum: rodboard 3 years ago
Jeffrey Mullendore
I could not figure out how to post a picture of the line guide and a picture of the handle.
Norman,
I hope you don't mind, I sent those two pictures to you email address from my work email.
Everyone have a great weekend.
Mully
Forum: rodboard 3 years ago
Jeffrey Mullendore
Lance thank you............
Norman,
I just recently got into building and refurbishing fishing poles. I used to make my own ice fishing rods 40 years ago but never had the proper tools (functional not pretty). The gauge I used I purchased from MudHole about 6 months ago is this one: . Last night I checked them again to verify the size. I also checked for a model number but all I can f
Forum: rodboard 3 years ago
Jeffrey Mullendore
Lance,
I am at work right now.....:) So I do not have the actual model number.
However, after I removed the line guides last night I measured the inside diameter on my line guide measuring tool.
They do look small though I will give you that.
Mully
Forum: rodboard 3 years ago
Jeffrey Mullendore
Good Morning all,
<<HELP>>
In the collection of old rods and reels that my father left me was a Heddon Pal rod. I am in the process of refurbishing the rod. The line guide wraps are totally rotted so I cannot put a fresh coat of line guide seal on them. When I removed the line guides last night I discovered one of the guide foot was broken. I thought "no worries" I
Forum: rodboard 4 years ago
Jeffrey Mullendore
David,
Where did you find the wheels (wood with rubber) on the support end of your setup...?
Mully
Forum: rodboard
Current Page: 1 of 1
|