SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 8 of 8
2 years ago
Owen degroff
Hello
Fuji titanium sic
Fuji titanium torzite
Or alps titanium
Are all the guides i use now
16 12 10 8 8 highframe
Then finish with 8 running guides
8 ring Size tip top.
Rec coil guides are
Not something I recommend
grooving and bending being the
common complaints.
Forum: rodboard 4 years ago
Owen degroff
ok sooo still waiting on some of the guides to try this out (backordered).
i was planing on getting the extra guides so i had them to play with if i needed them
but i just orderd 16h 12h 10h 8h 8m 7m 7l then rec 10 8 8Lx6
I'm having trouble figuring out where to put the guides
i know im gonna start out with the 16 cause it match up with a reg 20 just fine
The suggested setup from CTS
Forum: rodboard 4 years ago
Owen degroff
im understanding this better now
The 8hx2 was def a mistake and i was just thinking i should grab extras of the 8m and the recs but i see what your saying and after looking at the numbers
I think i found a solution
torzite:16(43.3) 12(31.8) 10(30.2) 8(26.8) 8m(20.8) 7m(19.4mm) 7L(13.2) Then REC going 10(12.71)maybe 8(12.41) 8L(10.49) til the tip
there's still gonna be a dip bet
Forum: rodboard 4 years ago
Owen degroff
The alps TIYTZG 20 is 41.24mm for height with a ID of 15.87
The torzite 16 is 43.3mm for height with the ID the same as a SIC 20 from what i understand.
it seems like it should be close enough its only 2mm difference
torzite 8m is 20.8mm and the recoil 8 is 12.41mm says mudhole
is 20.8 to 12.41 to big of a jump ?
here's what i came up with your help
torzite 16(43.3mm) 12(31.8mm) 1
Forum: rodboard 4 years ago
Owen degroff
ok
i have a couple things in mind while figuring this out, quality and comfort being #1.
Cost being #2,Woof they don't mess around with torzite guides.
so i wanted to throw a couple ideas your way to see what you think.
i was thinking of a couple different layouts
titanium torzite my expensive light weight setup idea .
torzite and RECoil
20h 16h 12h 10h 8h 8h 8m 8m then recoi
Forum: rodboard 4 years ago
Owen degroff
hi Adam,
Thank you for responding.
so i originally was set on the closer blank but i had some time to think while i was waiting for responses and making the handle.
lots of builders were saying that CTS were much nicer rods for not that much more.the closer was 230$ and CTS 278$
so i went with the CTS and picked chameleon green gold.i went with the Affinity Float 13' 4-8lb.
still building
Forum: rodboard 4 years ago
Owen degroff
hello everyone
I'm just starting my first build and i have some questions ..
im building a lamiglas 13' 2pc cpb1562ml blank pairing it with a eba callibre 2 5.1inch reel.
what guides/sizes i should be using is the first thing i would like to get out of the way.
ill be fishing in upstate ny so ice is always a issue.
I've been fishing raven rpx and i would like to use something different.
Forum: rodboard
Current Page: 1 of 1
|