SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 21 of 21
4 years ago
Brandon parlacoski
You can for sure trim them, I cut them with a type 1 aluminum oxide cutoff wheel works perfect. As far as the winding check not sure about size 16 but I know a Fuji wcs 17 check fits the size 17 threads perfectly with a little Dremell work to hollow out the inside.
Forum: rodboard 4 years ago
Brandon parlacoski
Just got some seaguide ti frame guides, they look pretty good I haven’t got a chance to use them yet but they are nice. I had a small issue with one guide and the customer service was great I had a new one in just a few days.
Forum: rodboard 4 years ago
Brandon parlacoski
North fork st 962 or 964 are awesome 9’6” always seems to be my go to. A little extra length is always nice for floats but that always depends on the size of river and how much room you have overhead to cast
Forum: rodboard 4 years ago
Brandon parlacoski
Do you typically use light build on first coat then highbuild for second or the other way around I’ve been thinking about trying this but wondering which order would be better.My thoughts were high then light to just fix any imperfections of the first coat but I would be interested to hear from the people that either do it this way or have at least experimented with it. Thanks
Forum: rodboard 4 years ago
Brandon parlacoski
Awesome thanks super excited to get my hands on them.
Forum: rodboard 4 years ago
Brandon parlacoski
Aleks Maslov Wrote:
-------------------------------------------------------
> Thank you TJ, you can use tape as an arbor, or a
> foam core shim.
Aleks initially on Facebook it was said they would come with arbor and cap what happened there. Could you tell me what kind of butt cap is in the pictures on your website I think it looks good with the grips and would still lik to use it.
Forum: rodboard 4 years ago
Brandon parlacoski
Thanks for all the great answers I really appreciate it.
Forum: rodboard 4 years ago
Brandon parlacoski
I will be using a abu Garcia revo mgx very similar in size to your curado. I guess a good question is how does one go about sizing guides for a casting rod..
Forum: rodboard 4 years ago
Brandon parlacoski
I’m building a north fork st964 9’6” 6-12 casting rod for steelhead/silvers and trying to figure out what size guide to start with I will be using Fuji kw guides. I’m thinking starting with a 12 10 8 6 does this sound about right any suggestions would be great. It seems like there’s tons of info for spinning setups just not a lot for casting.if it helps I’ll be using a revo mgx low pro reel. Than
Forum: rodboard 4 years ago
Brandon parlacoski
On the topic of availability I have ordered some new guides to try but a few that I need are sold out, Rick Hall do you know when the Tixog- n and Tixolg single foot guides will be back in stock? Thanks
Forum: rodboard 4 years ago
Brandon parlacoski
I’m not sure that is why I figured I would buy some and test them out. What is hard to tell on there website is how they are shaped and I know I like how the Fuji’s sit.
Forum: rodboard 4 years ago
Brandon parlacoski
14. Sea guide models
Just wondering what sea guide is comparable to Fuji kw double foot guide any help would be appreciated
Forum: rodboard 5 years ago
Brandon parlacoski
Hello I will be building a rod for a friend who likes the look of the American tackle ring lock a frame guides my question is I have mostly used kL-h guides on spinning rods with great results with the gps system and these look reasonably similar but I wonder would I use the the same reduction train and sizes for them. Still pretty new to rod building have built 10 rods so far with a lot to lear
Forum: rodboard 5 years ago
Brandon parlacoski
18. Re: White thread
I couldn’t find the pictures from hitena. Might have to give it a try anyway I would prefer not to have to paint the blank. The guy I’m building it for wants all white with red and gold trim like a Rainer beer can. I think it’s a great idea just don’t want it to turn out gray
Forum: rodboard 5 years ago
Brandon parlacoski
20. White thread
I am building a rod with white thread on a black blank and thinking about painting under the wraps what type of paint should I use. Thanks in advance
Forum: rodboard 5 years ago
Brandon parlacoski
I don’t have any experience with the p touch but instead use the pearl label and had the same issues, I have found through much trial and error my best results have been to trim close to the actual printed part of the label using sharp scissors and they have to be sharp no dollar store. Then stick label to high tack transfer tape this I think helps pull of some of the excess glue that comes out a
Forum: rodboard
Current Page: 1 of 1
|