SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 8 of 8
4 years ago
Shane Jarvis
Don Mang Wrote:
-------------------------------------------------------
> Anyone using Max 2K clear, MUST use a protective
> mask!!! JUST SAYING
That is absolutely correct. I can't believe I forgot to put that in my post.
Forum: rodboard 4 years ago
Shane Jarvis
Dennis Herold Wrote:
-------------------------------------------------------
> Shane what is 2k clear please? Thanks Dennis
Sorry a 2k clear is an automotive urethane clear coat that uses an activator/hardener. The 2k means 2 components ( I know makes no sense) If you have access to a spay gun you buy a quart kit for around $60 on amazon, it usually mixes 4:1. Or you can get a can of Spra
Forum: rodboard 4 years ago
Shane Jarvis
I sanded down a white blank down to raw carbon. I used 150 to remove the paint, this was the most work of the whole process. Then I quickly sanded with 180,220,320,and 400. Then I hit it with a maroon 3m pad, cleaned with acetone and put down my base coat. I then used a 2k clear for the final coat. I have used a few times and it is holding up great.
Hope that helps
Forum: rodboard 4 years ago
Shane Jarvis
Tom Kirkman Wrote:
-------------------------------------------------------
> You can make an impromptu lathe from a drill and a
> V-stand. Check the photo page under tools and see
> what turns up. This sort of set-up is usually good
> enough for occasionally shaping of small EVA
> pieces.
>
> .............
Thanks, I think I will give that a try
Forum: rodboard 4 years ago
Shane Jarvis
I guess I should have been a little more specific. I would like a pre-made split grip with a 3/8 inch inside diameter.
I don't have a lathe to turn my, how hard would it be shape the round EVA with out a lathe?
Forum: rodboard 4 years ago
Shane Jarvis
Does anyone have a source for grey EVA grips? I searched the topic and didn't get the results I was looking for. I don't not have the capability to turn my own right now.
Forum: rodboard 5 years ago
Shane Jarvis
I was getting ready to purchase the guides for my new rod I am planning on building, and was wondering if anyone has used the American tackle TiForged guides on any of their builds. Any opinions would be great, I can't find much information on them. I am not looking for guide spacing, just opinions on how well you like them.
Thanks
Shane Jarvis
Forum: rodboard
Current Page: 1 of 1
|