SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 30 of 30
5 years ago
Robert Wood
1. Re: Ice rods
Check out on you tube Mud Dog Rods he has a set up that makes wrapping noodle tips way easier. I use this set up and no problems with a noodle tip
Forum: rodboard 5 years ago
Robert Wood
I have friend who asked if I could rewrap an older bamboo rod that is falling apart. I am needing to know the best threads to use and finish?
Forum: rodboard 5 years ago
Robert Wood
Does anyone know where I can find a Tenkara Style Rod blank?
Forum: rodboard 6 years ago
Robert Wood
I don't know if you have a menards around you but I know they carry the springs and plastic washers
Forum: rodboard 6 years ago
Robert Wood
I made an extension for my CRB carriage I can run up to 6 spools on it. Its easy to do too a couple pieces of aluminum strap 3/4 inch wide and a few nuts and 1/4 all thread
Forum: rodboard 6 years ago
Robert Wood
I have a guy looking for a S glass rod. He wants to use it for catfish and sturgeon. I need to be in the 7 foot range and have a sensitive tip for the sturgeon bite but yet have enough backbone for a 70 lb fish. I haven't found anything for this yet. Any help would be greatly appreciated.
Forum: rodboard 6 years ago
Robert Wood
yeah if you're not to sure look up @#$%& blanks he has some good blanks too I just got my order last week getting set to start building them this weekend. DH Customs had some really nice blanks also I have built a few on his blanks and have had no complaints about them either
Forum: rodboard 6 years ago
Robert Wood
I have been using the extreme taper blanks a lot I really like the feel and the action. I have used them for trout, perch, crappie and walleye.
Forum: rodboard 6 years ago
Robert Wood
Ben belote if you take the proper precautions there is no harm in it. Which I am doing. My full time job as a welder has taken more of a toll on my body than turning rods ever will.
Forum: rodboard 6 years ago
Robert Wood
I have been using my cordless drill and sand paper to turn fiberglass ice rods down to what I want. What are you guys using to do this? Is there a better set up for it? I am hoping to find something a little fast cuz this seems to take quite a bit of time.
Forum: rodboard 6 years ago
Robert Wood
14. Re: Rod guides
I use the same set up as Robert A. Guist the multiple drawers work well then I use a piece of scotch tape and a sharpie to write the size, style and manufacturer. And I can store all my other stuff in it like the marbling pigments, winding checks and other stuff
Forum: rodboard 6 years ago
Robert Wood
Try the mhx power noodle (FIB-26ul-MHX) I love that rod for my panfishing
Forum: rodboard 6 years ago
Robert Wood
Thanks Tom
Is it worth having both around the shop? or just do the multiple coats with the light?
Forum: rodboard 6 years ago
Robert Wood
I am still fairly new to building so I am wondering what you guys prefer for your finish? low or high build? I have been using the ProKote low but was thinking about trying the high build
Forum: rodboard 6 years ago
Robert Wood
19. Re: Pro Kote
Thanks Donald La Mar I will remember that. I build all my rod in my basement so that might be a factor cuz it is a lot cooler down there
Forum: rodboard 6 years ago
Robert Wood
20. Re: Pro Kote
Thanks Taylor I looked at it but I wanted to make sure it wasn't something I had done before I spent more money
Forum: rodboard 6 years ago
Robert Wood
21. Re: Pro Kote
Thanks guys. I will try the hot water or microwave. It is just the resin that has done the crystalizing. hopefully this fixes the problem its to expensive to throw out and buy new
Forum: rodboard 6 years ago
Robert Wood
22. Pro Kote
I have been using Pro Kote finish and recently the resin has gotten grainy looking and really thick is this normal? I always close the bottle right after I get out what I need. Am I doing something wrong?
Forum: rodboard 6 years ago
Robert Wood
I am still fairly new to building but I really appreciate all the help you guys are giving. Thank you
Forum: rodboard 6 years ago
Robert Wood
Thank you James Taylor. Here in Wyoming there really isn't a lot of call for a spey or center pin rod that know of so building one of these will be a new adventure for me
Forum: rodboard 6 years ago
Robert Wood
Jay McKnight I guess I was asking for recommendations from you guys that have built some of these style rods
Forum: rodboard 6 years ago
Robert Wood
28. Re: Air brush
I have on a couple rods mainly just above the handle or at the very tip if they wanted a different color like many of the ice rod blanks you can buy now
Forum: rodboard 6 years ago
Robert Wood
I agree with Lewis Morgan. I love the MHX Rods I have built plenty of them for a guy that use to fish nothing but G Loomis. He got rid of his G Loomis rods and went all MHX
Forum: rodboard 6 years ago
Robert Wood
30. centerpin rod
I had a guy ask me about a 13'6" 3 or 4 piece medium light center pin rod but I cant really find what I am looking for. any help or suggestions would be greatly appreciated
Forum: rodboard
Current Page: 1 of 1
|