SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 13 of 13
2 years ago
Andrew Best
Working on converting my old rod dryer to a automatic ice fishing jigger. Is it possible to convert to battery operated?
I have at AC 110V 50/60HZ 3.8W 7.5/9 RPM CW/CCW
Forum: rodboard 6 years ago
Andrew Best
Picked up some testers enamel marbling paint today. I'm going to mess around with it but if anyone had some advice on how to face one color into another I would appreciate it. Add a little heat? Going to paint like 2 inches of green and then 2 inches of yellow and 2 inches of red and would like to make the transition "soft".
Thanks!
Forum: rodboard 6 years ago
Andrew Best
I am going to put down a solid color for every guide. Then on top of that I am going to place my threads to secure the guides. Do I use different size thread to do this or will A work for both under and over lay?
Thanks!
Forum: rodboard 7 years ago
Andrew Best
Thank you so much Bob! 220 grit? Can I just try to take off the 2nd coat or do I have to go all the way down to the wood?
Forum: rodboard 7 years ago
Andrew Best
Well, I put a 2nd layer of epoxy on the handle and it went horribly. A lot of waves. The first coat looked great. Can I do anything to fix this? Sand it down and apply one more?
Forum: rodboard 7 years ago
Andrew Best
Thanks for the tips sir!
I already dropped it off at the engraver so we will see what it looks like when it comes back but I will definitely take your advice on my next one!
Forum: rodboard 7 years ago
Andrew Best
I like this idea, have you done it? Any tips? I saw on youtube to cover everything but the raving with tape and then put a glue down to secure it. Not sure what type of glue would be best.
Forum: rodboard 7 years ago
Andrew Best
I was told not to but would be open to staining it. I definitely know I want to epoxy it and have a nice clear finish on it. I was hoping I could paint on the letters then wipe clean and then epoxy it but not sure if it would work..... I really don't mind staining it but not sure what type to use.
Forum: rodboard 7 years ago
Andrew Best
So I have a red cedar handle unfinished that I am having laser engraved with Initials. My question is, what is the best way to paint the engraving? Do I stain it first? I was told not to stain it and just epoxy the entire handle but that was before I decided to have it engraved and wanted paint in the engraving? Any help?
Thanks !!!!!!!!!!!!!!!!!!!
Forum: rodboard 7 years ago
Andrew Best
Thanks everyone. I ended up buying some silicon plumbers tape that self adheres to itself. Feels good and I can move it when I want!
Thanks for everyones input.
Forum: rodboard 7 years ago
Andrew Best
What does every use for a Tennessee handle to hold your reel on?
Forum: rodboard 7 years ago
Andrew Best
Thanks for the information. Anyone have any suggested motors that would fit the bill? I am really not electrically savey so less wiring the better!
Forum: rodboard 7 years ago
Andrew Best
SO what RPM for a wrapper than? Looking to try to make my own and save the money.
Forum: rodboard
Current Page: 1 of 1
|