SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 99
4 weeks ago
Terry Fude
After I did the search from the info Tom gave, I did figure that part out, and also found the site is not working, comes back with an error at the end that says "untrusted" so network solutions owns the domain, and it was renewed on 2.22.24, but that is all the info I can get on them.
Forum: rodboard 4 weeks ago
Terry Fude
I sent them an email, guess I will see what happens.
thank you
T
Forum: rodboard 4 weeks ago
Terry Fude
Try looking at decals for fingernails. I used them to do a cubs rod for a friend
Forum: rodboard 4 weeks ago
Terry Fude
the site is not working, so possibly no longer available. I was hoping it might be G Loomis blanks, but the one you listed makes more sense as it would be near to each other.
Forum: rodboard 4 weeks ago
Terry Fude
Would anyone know what blanks they were built with? I am on the last one and would like to try to build one very close to it.
TIA for any info.
Forum: rodboard 3 months ago
Terry Fude
thank you, I was hoping there was some trick to get it to work, but not, so on with the build.
Forum: rodboard 3 months ago
Terry Fude
they were the green and black ones, they were telescopic, and when you collapsed them, the rod didn't rattle around, and when it was extending you could feel friction as you pulled it into place. So does anyone know how that was accomplished?, I don't want to destroy the one I have just to find out. I would like to incorporate it into the new flippin stick am am building.
thank you for looking
Forum: rodboard 5 months ago
Terry Fude
Link please I dont seem to find the excel sheet that you mentioned
Forum: rodboard 7 months ago
Terry Fude
Reed rods has taken over making them. He has 2 brands he makes them for. They look great,
Forum: rodboard 9 months ago
Terry Fude
Thank you, I didn't see any on the site, so I will have to check with them for more information
Forum: rodboard 9 months ago
Terry Fude
Any know the site that had the custom rod stands, he made them in all different colors and for different bases. If I remember right there were wrapping designs and weaving designs also on there. It may have been on a fb site, but I can't remember.
Maybe AL English or something similar
Thanks in advance for any help
Forum: rodboard 10 months ago
Terry Fude
It's a fate casting in white, with micro guides. 1 is bad and shaving the line, so I need to change it, when I figure out which one. They are really small micro guides so can't see any cracks. Any help on what brand guides they use will help.
Thank you
T
Forum: rodboard 10 months ago
Terry Fude
Looking for recommendations for guide kits, that will possibly be used with braided line, it will be both spinning and casting, for bass fishing. I don't want to break the bank, but want something that is durable and will last, I am pretty tough on rods and guides.
thank you for any ideas and suggestions
T
Forum: rodboard 1 year ago
Terry Fude
thank you for all the info, I want to put a small wrap at the retracted area
Forum: rodboard 1 year ago
Terry Fude
I will be building a new flippin stick, the blank is a 2 piece telescopic one, so the top slides back into the handle area. looking for recommendations on building the handle section. do I just build it like a normal handle, or is there a special way to do it, or different components ? I think it will need a heavier(or thicker) butt cap so the blank doesn't just push thru it. I would like it to b
Forum: rodboard 7 years ago
Terry Fude
<p>these are what i replaced the strips that came with the tracks with, its 1/8 thick alum strip 3/4 in wide, got it at fleet farm, they are 9" long</p>
Forum: rodboard 3 years ago
Terry Fude
Welcome to the site and a great hobby that will become addictive really quick. there is so much great info on this site, and great people that are always willing to help out.
Forum: rodboard 4 years ago
Terry Fude
Schneiders has one listed in the hot specials section, i got one it seems to be nice, haven't built it yet. Cant decide on the handle i want on it.
Forum: rodboard 4 years ago
Terry Fude
anyone what blank he used for his rods, i have a few left, but may want to build a new one if i can figure out the blank, they have really good for me
thanks
terry
Forum: rodboard |