SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 11 of 11
2 years ago
Ian Drent
My Rod Shop Australia in association with The American Tackle Company are extremely excited to bring the PRO-STAFF program to Australian Rod Builders! This is an amazing opportunity to partner with us and reap enormous benefits!
The PRO-STAFF program is a NO OBLIGATION community program made up of both dedicated men and women from around the world who are passionate about rod building and savi
Forum: rodboard 3 years ago
Ian Drent
Hands down best performing guides are the Microwaves imho, greater casting distance and more accurate. If we're talking roller guides then that's another story.
Forum: rodboard 6 years ago
Ian Drent
I use them in the majority of my builds for my customers, and i have them on my own rods. Can't fault them.
Forum: rodboard 7 years ago
Ian Drent
Hi Darrel,
I've had the same issues as you and it's been an issue for me for some time until recently. Try to work out at what part of the process are the bubbles being introduced. I found out the following and it may apply to you.
If bubbles are there before your start mixing then your 'part a' and 'part b' may be too cool. I now store my part a and part b in my laundry on the hot water sy
Forum: rodboard 7 years ago
Ian Drent
Phil Erickson Wrote:
-------------------------------------------------------
> Ian every incident like this has two sides! You go
> public with only yours, what if they believe you
> have some responsibility in this matter? Should
> they come back with language like yours?
>
> This is not the purpose of this forum !!!
And what language would that be Phil? It seems y
Forum: rodboard 7 years ago
Ian Drent
John Cates Wrote:
-------------------------------------------------------
> Ian
>
> check your email
received and replied.
Forum: rodboard 7 years ago
Ian Drent
Phil Erickson Wrote:
-------------------------------------------------------
> This forum is NOT the place to put your personal
> complaints! Deal with them directly, not on this
> forum!! What your doing is called " A cheap shot!"
Phil,
Have dealt with them directly but they don't want to take an ounce of responsibility. You say what I'm doing is called a cheap sh
Forum: rodboard 7 years ago
Ian Drent
Hi John,
If only the passion and commitment would extend to your customer service. I've had the worst experience ever getting Flex Coat to take responsibility and accountability for selling faulty quad dryer setups. Very disappointing for such a large company - particularly when they invest time and money selling themselves in videos like this one.
If you're interested in knowing more abou
Forum: rodboard 7 years ago
Ian Drent
Hi all,
I purchased a new flexcoat quad dryer recently and i will randomly have different motors shudder sometimes individually or simultaneously.
Not sure why so i was hoping someone here may help. I've also sent an email to flexcoat but had no response yet.
I do have a video but can't post it unfortunately. The unit has 4 x 6rpm motors.
TIA
Ian D
Forum: rodboard 8 years ago
Ian Drent
I have the same problem with my Alps. I have to hold the chuck for about 5 seconds then turn the chuck half a revolution in the direction i want it to go.
Forum: rodboard
Current Page: 1 of 1
|