SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 33
5 years ago
John Schulze
2. Cui blanks
Has anybody ever used cui blanks? I can't find any recent data on them. The only info that I can find is a couple stores on the gulf coast sell them. Their 2pc long blanks have my interest.
Forum: rodboard 5 years ago
John Schulze
I have a 9 foot 6 surf blank I bought from mudhole a few years ago. The PN is GSB1147F but the only information I can find, even emailing mudhole, is that it is a Surf, Bar & Bait Blank - 9'6" 1pc 12-25 lb.
I am trying to build this up for tailrace and surf fishing but cannot remember the lure/bait weight range. the measurements on the blank are
.710 butt
.610 @ 21"
.530 @ 3
Forum: rodboard 5 years ago
John Schulze
What knot do you use on the Airbraid Silky 4 lb line that is .001 in. diameter? We are trying to figure this one out here at work.
Forum: rodboard 6 years ago
John Schulze
Does anybody have another option or idea to replace the MHX panfish rod that was 9 foot long? It appears to be discontinued, I cannot find it at any supplier.
thanks in advance.
Forum: rodboard 8 years ago
John Schulze
In Georgia out regulation is this.
"It is unlawful to take in one day or to possess at any one time, except at a residence or commercial storage facility, more than the daily creel limit for each species."
You stay fishing for multiple days and keep limits each day with out having to go home to store fish. I do wonder how this effects camping. I will have to contact my DNR.
Forum: rodboard 8 years ago
John Schulze
I will past the link when I get home tonight. My phone is not cooperating.
Forum: rodboard 8 years ago
John Schulze
Thanks guys.
I have started a Facebook group as a start.
It is called Georgia Rod Builders
I started building rods 2 years ago after taking a mudhole class in Savannah.
Forum: rodboard 8 years ago
John Schulze
Are there any builders in Georgia out there?
I am up here in Gwinnett county and would like to see if there is any interest in doing a informal group.
Thanks
John Schulze
Forum: rodboard 8 years ago
John Schulze
I need to finish up a project spinning rod that is being built on a 7' 6" Ml MHXL902 blank. using a 1500 or 2000 size reel.
I am going to use minima SV guides.
The train that I am thinking of is 25 16 12 10 8 8 8 8 top.
I am not used to doing a longer rod like this. Rod will be for throwing small jigs (1/4 oz) plastics and popping corks.
Any help will be appreciated.
thanks,
Forum: rodboard 8 years ago
John Schulze
I reamed t ok a dry fit. But it was a snug fit in the area that split. Would a more liquid epoxy be beneficial in this situation?
Forum: rodboard 8 years ago
John Schulze
I was reaming out a cork grip for a rod that has a lot larger diameter than I am used to. I knew it was a little thin so I was being careful while reaming.
When I was about done sliding the grip over the epoxy (propaste) the cork split and it started to ooze out under the pressure.
Do you guys follow any rules of thumb about minimum cork wall thickness? I would say this rod had about .060 of
Forum: rodboard 8 years ago
John Schulze
16. Reel seat help
I accidently ordered the wrong reel seat for a rod that a friend has asked me to build him. Will a fuji Tdpsm 20 fit an Abu Garcia 5500\6500 okay? He wanted a 7 ft 6 rod for throwing bomber long A's work.
edited for spelling due to phone autocorrect.
Thanks
Forum: rodboard 8 years ago
John Schulze
Thanks a bunch for the response.
I will try a new one when I get home.
Forum: rodboard 8 years ago
John Schulze
Thanks a bunch for the response.
I will try a new one when I get home.
Forum: rodboard 8 years ago
John Schulze
19. Marbeling help
My patterns are not coming out on the crisper side of things. They tend to run together , still looking nice, but it is not the effect I am wanting.
Do you let the rod finish set up a little before doing the marbling, to keep the design crisper?
I am using regular prokote.
Thanks
Forum: rodboard 8 years ago
John Schulze
What do you gain by mixing the epoxies and inwhattypeof application would this be used with?
Forum: rodboard 8 years ago
John Schulze
21. Re: New Issue
Hopefully my wife won't throw this one away like she did the last issue.
Forum: rodboard 8 years ago
John Schulze
thanks guys. I am a freshwater guy about 90% of the time. Thank goodness for in-laws that live on the coast.
Forum: rodboard 8 years ago
John Schulze
I am building a couple 30-50 pound blanks for use with spinning reels and I am having a helluva time figuring out the reel seat portion of the build.
Can you use the heavy duty reel seats like the aluminum ones for spinning reels? Or is there a source for heavy duty spinning reel seats?
Forum: rodboard 8 years ago
John Schulze
Thanks I think I am going to give one a try.
do you know the top sizes? They don't seem to be listed
Forum: rodboard 8 years ago
John Schulze
Does anybody have experience building on the klassicglass blanks?
I am wanting to build on one of the 3 wt blanks for my first fly Rod build.
Forum: rodboard 8 years ago
John Schulze
What position do you guys store your blanks while they are waiting to be built?
I would like to set up my rod building room to store them horizontally but I am worried about the rods developing a bow in them if they are only supported on a few locations instead of fully supported.
Thanks
Forum: rodboard |