SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 422
4 years ago
Capt. Michael Harmon
I definitely miss the bushido fly blanks. Bring them back.
Forum: rodboard 5 years ago
Capt. Michael Harmon
I like the feel of Winn grips but won't use them anymore. The skins are wearing off and they are looking pretty rough. Used them on fly, surfcasting, and bottom rods. All show wear after one season, but the bottom fishing rod is the worst. Luckily my customers prefer cork, shrink and EVA. Otherwise I would be replacing grips.
Forum: rodboard 5 years ago
Capt. Michael Harmon
X2 Lynn, be careful test fitting. The carbon shell will scratch your blank.
Forum: rodboard 5 years ago
Capt. Michael Harmon
I agree with grant. 25 should be fine but what size is the reel and what type of line are you using? As Phil said "the devil is in the details". I've used 25 and I've used 30 stripper guide with braid because of the size of the reel spool. With braid you can also move the stripper guide a bit closer to the reel. Tape the guides up and test the layout. Good luck.
Forum: rodboard 5 years ago
Capt. Michael Harmon
Smith optics with chromo pop lenses or igniter lenses. Not cheap but great in all light conditions and for sight fishing.
Forum: rodboard 5 years ago
Capt. Michael Harmon
I've used it on many surfcasting and bottom fishing rods. Holds up very well. Tight lines!
Forum: rodboard 5 years ago
Capt. Michael Harmon
Frank, check out Rod Geeks. They have a 4pcs surf rod.
Forum: rodboard 5 years ago
Capt. Michael Harmon
Billy, Wow....that's a cow. I will definitely check out the blanks you recommended. Much appreciated. Tight lines, Mike
Forum: rodboard 5 years ago
Capt. Michael Harmon
That's a great suggestion. I'll check it out. Thanks Spencer
Forum: rodboard 5 years ago
Capt. Michael Harmon
That's a great suggestion. I'll check it out. Thanks Spencer
Forum: rodboard 5 years ago
Capt. Michael Harmon
Matthew, my bad. I clicked on the highlighted suppliers you posted. I see you gave me some options....including a musky blank. Much appreciated.
Forum: rodboard 5 years ago
Capt. Michael Harmon
Matthew thanks for the reply. I have accounts with several suppliers so I've looked at several options. My hope is someone has built a similar rod and can point me towards a specific blank. I'm leaning towards a musky blanks.
Forum: rodboard 5 years ago
Capt. Michael Harmon
Looking to build a spin rod to cast surface plugs from a boat for striped bass. Lure weigh 2-4oz blank length 7'6"-8'. I have some ideas but I'd like to get some input from the group. Thanks in advance
Forum: rodboard 6 years ago
Capt. Michael Harmon
I use them for fly rod grips, and I always coat carbon fiber with epoxy. It makes a big difference. The grip becomes sticky with wet hands. Plus you can put your rod label on the grip. I haven't tried permagloss on the grips yet but I'm sure it work. Permagloss is a great product.
Forum: rodboard 6 years ago
Capt. Michael Harmon
You can also go to the mudhole site. Mudhole had a live demo the other day that can answer most if not all your questions. Good luck
Forum: rodboard 6 years ago
Capt. Michael Harmon
Seeker hercules 70L. Also check out rainshadow blanks
Forum: rodboard 6 years ago
Capt. Michael Harmon
Ben, I have another one. It's about catching the fisherman not the fish.
Forum: rodboard 6 years ago
Capt. Michael Harmon
A friend received a rod as gift from a client with those guides a couple years ago. The rod was purchased in Japan while on a fishing/business trip. It's a 10' light surf rod and pretty sweet. The first thing I said was "hope you can get replacement guides". They are impressive but look easy to break. I started a thread asking for info about purchasing on this site, with no luck. I als
Forum: rodboard 6 years ago
Capt. Michael Harmon
24. Re: Printers
X2 tom. Custom labeling system to the left. Larry is great to work with and the label printer works perfectly. Great product.
Forum: rodboard 6 years ago
Capt. Michael Harmon
After reading responses I realize I left out that my guide recommendation is for a saltwater bottom fishing or jigging rod, I'm not casting. I use the 10's to allow line to leader knots to pass easily. You need to take line a leader connections into consideration. If that's not an issue you can use 8's as runners.
Forum: rodboard 6 years ago
Capt. Michael Harmon
You are on the right track. You have a lot of good info. I start with a 20 and go to 10's to the tip. Lots of ways to do a spiral so take in all the info builders give you and do what makes the most sense to you. Always static test before wrapping. Good luck
Forum: rodboard 6 years ago
Capt. Michael Harmon
Just a thought Mel. What about the guide placement? Is the guide placement(spacing) different from your rods? Maybe the location of guides in relation to the ferrule is putting an additional load on ferrule causing it to fail. My $.02.
Forum: rodboard 6 years ago
Capt. Michael Harmon
Check out this MHX:
MHX ST1355 Steelhead Rod Blank . Good luck
Forum: rodboard 6 years ago
Capt. Michael Harmon
Check out this MHX:
MHX ST1355 Steelhead Rod Blank . Good luck
Forum: rodboard |